- Obecnie brak na stanie
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Transparent Gray
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
![]() |
| Dagu Rover 5 chassis with Orangutan SVP robot controller and additional electronics mounted to an RP5/Rover 5 expansion plate (narrow). |
|---|
![]() |
| Two RP5/Rover 5 expansion plates with an Orangutan SV-328 and an Arduino Duemilanove. |
|---|
![]() |
| Pololu RP5/Rover 5 wide expansion plate with a TReX Jr. and an RC receiver. |
|---|
![]() |
| A narrow RP5/Rover 5 expansion plate with an Orangutan SV-328 and a Sharp digital distance sensor. |
|---|
This 1/8" acrylic expansion plate lets you mount a variety of components to your Rover 5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components. The slot size and spacing is compatible with the many Tamiya mechanical sets that have 3 mm holes spaced 5 mm apart. Included with the plate are four tapping screws for mounting the plate to the Rover 5 tracked chassis.
These plates were originally designed for our now-discontinued RP5 chassis, but they are also compatible with the Dagu Rover 5. However, we have noticed a misalignment between the mounting holes on the expansion plate and the Rover 5, so you might only be able to secure the plate with two screws on opposing corners. These plates can also be used on their own as chassis for custom-built robots.
The Pololu RP5/Rover 5 expansion plate comes in both narrow and wide versions. The narrow plate (RRC07A) is 6.8" x 3.1" (17.2 x 8.0 cm) and covers the main plastic housing of the Rover 5 chassis. The wide plate (RRC07B) is 6.8" x 5.0" (17.2 x 12.7 cm).
Both the narrow and wide expansion plates are available in a variety of colored (and clear) acrylics:
![]() |
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Transparent Gray |
Producent BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Osoba odpowiedzialna BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Uniwersalny programator pamięci EEPROM, Flash NAND, SRAM oraz MCU. Sterowany jest z poziomu komputera za pomocą interfejsu USB i oprogramowania dla systemów Windows. TL866II Plus
Brak towaru
Zmontowany zestaw AVT, bożonarodzeniowa, świecąca choinka LED. AVT1844 C
Brak towaru
ATmega32U4-AU to mikrokontroler z rodziny AVR w obudowie TQFP44, wyposażony jest w pamięci: 32 kB Flash, 2.5 kB SRAM, 1 kB EEPROM. Dodatkowe wyposażenie to: interfejs UART oraz interfejs SPI. Napięcie zasilania to 2,7..5,5 V, maksymalne taktowanie 16 MHz.
Brak towaru
Brak towaru
LITEcompLPC1114 - Moduł dodawany do książki "Mikrokontrolery LPC1100. Pierwsze kroki"
Brak towaru
Listwa zaciskowa męska, kątowa, 16-pinowa. Raster 3,81 mm. Wysokość 7 mm. KF2EDGR
Brak towaru
Magnes trwały neodymowy walcowy o średnicy 6 mm i wysokości 1 mm.
Brak towaru
HK Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) (v2 Firmware) (8992)
Brak towaru
Moduł należący do systemu inteligentnych ubrań Adafruit FLORA, wyposażony w czujnik światła TSL2561 do pomiaru natężenia światła z otoczenia. Czujnik zasilany jest napięciem 3V, zakres: 0,1÷40k+ LUX, komunikacja poprzez magistralę I2C. Adafruit 1246
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Moduł zaprojektowany dla Banana Pi, bazuje na układzie Maxim MAX232, ma wudowane złącze DB9. Napięcie pracy wynosi 5 V. Nazwa producenta: BPI-UART expand module
Brak towaru
Brak towaru
Brak towaru
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Transparent Gray