- Out-of-Stock

Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Transparent Gray
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
![]() |
Dagu Rover 5 chassis with Orangutan SVP robot controller and additional electronics mounted to an RP5/Rover 5 expansion plate (narrow). |
---|
![]() |
Two RP5/Rover 5 expansion plates with an Orangutan SV-328 and an Arduino Duemilanove. |
---|
![]() |
Pololu RP5/Rover 5 wide expansion plate with a TReX Jr. and an RC receiver. |
---|
![]() |
A narrow RP5/Rover 5 expansion plate with an Orangutan SV-328 and a Sharp digital distance sensor. |
---|
This 1/8" acrylic expansion plate lets you mount a variety of components to your Rover 5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components. The slot size and spacing is compatible with the many Tamiya mechanical sets that have 3 mm holes spaced 5 mm apart. Included with the plate are four tapping screws for mounting the plate to the Rover 5 tracked chassis.
These plates were originally designed for our now-discontinued RP5 chassis, but they are also compatible with the Dagu Rover 5. However, we have noticed a misalignment between the mounting holes on the expansion plate and the Rover 5, so you might only be able to secure the plate with two screws on opposing corners. These plates can also be used on their own as chassis for custom-built robots.
The Pololu RP5/Rover 5 expansion plate comes in both narrow and wide versions. The narrow plate (RRC07A) is 6.8" x 3.1" (17.2 x 8.0 cm) and covers the main plastic housing of the Rover 5 chassis. The wide plate (RRC07B) is 6.8" x 5.0" (17.2 x 12.7 cm).
Both the narrow and wide expansion plates are available in a variety of colored (and clear) acrylics:
![]() |
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Transparent Gray |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
No product available!
No product available!
No product available!
Black and white e-Paper display with a diagonal of 7.5" and a resolution of 880x528 px. SPI interface. Without PCB. Waveshare 7.5inch HD e-Paper
No product available!
Camera with a monochrome CMOS OV9281 sensor with a resolution of 1280x800 px. Equipped with a snapshot, it communicates via the 2-lane MIPI interface. ArduCAM U6072
No product available!
No product available!
No product available!
No product available!
FLUX LED 7.62 x 7.62 [mm] 5mm WARM white 3600K, angle 90 degrees; light intensity 2200 mcd (20mA) (3.2V) 4.0 [lm]
No product available!
LCD 2x8, 58x30mm, FSTN, LED backlight (white), enhanced temperature range, RoHS
No product available!
No product available!
Waveshare Mix Board, 4 in 1 adapter plate, includes temperature sensor, infrared receiver, joystick and buzzer
No product available!
No product available!
No product available!
No product available!
No product available!
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Transparent Gray