- Obecnie brak na stanie
RGB LED Satellite Module 004 (Circle)
The Satellite Module 003 is an RGB LED round “pixel” with three bright surface-mount RGB LEDs. This LED module is designed to be used with the OctoBrite DEFILIPPI to easily integrate full-color LED lighting into your next project.
![]() |
| Using an OctoBrite to control the color and brightness of multiple satellite modules. |
|---|
The 003 and 004 satellite modules from Macetech have three bright surface-mount RGB LEDs. You can use a string of satellite modules to create custom lighting projects, such as for holiday decorations or art displays.
These satellite modules are designed for use with the OctoBrite DEFILIPPI and a 12 V power supply. An OctoBrite can control the individual color and brightness of up to 8 satellites in response to commands from a controller such as an Arduino or Maestro. Satellite modules can be easily connected to the OctoBrite using a 6-conductor ribbon cable with 2×3 IDC connectors.
Note that though the satellite modules are designed for use with the OctoBrite, you can also use them with ShiftBars (one module per ShiftBar), or you can power the red, green, and blue LEDs directly using a 9 – 11 V supply. The three RGB LEDs are connected in series (so all three LEDs will always have the same color), and a resistor on each channel limits its current to about 20 mA at 11 V. The LED channels have a common anode, which is connected to the unlabeled satellite module pins.
The rectangular 003 satellite module is 2.8" × 0.34" and has 0.125" mounting holes spaced 1" apart. The round 004 satellite module is 1.45" in diameter and has 0.125" mounting holes on 0.85" triangular spacing.
|
|
For a brighter RGB LED module in a similarly small package, consider the Satellite Module 001. For an RGB LED with a built-in driver, consider the ShiftBrite.
![]() |
RGB LED Satellite Module 003 (Bar) |
![]() |
OctoBrite DEFILIPPI |
Producent BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Osoba odpowiedzialna BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Zmontowany mikroprocesorowy włącznik akustyczny typu klaskacz. AVT1835 C
Brak towaru
Brak towaru
Platforma mobilna Line Follower z dwoma silnikami, 5-cioma czujnikami odbiciowymi, wyświetlaczem LCD, brzęczykiem i trzema przyciskami użytkownika. Oparty na mikrokontrolerze AVR ATmega328 programowanym w języku C. Pololu 975
Brak towaru
Brak towaru
Flasher 5 PRO, programator przeznaczony dla mikrokontrolerów: Renesas M16C/62, M16C/80, M32C, M79, R32C i serii R8C. Segger 5.05.10
Brak towaru
Tester wzajemnej sympatii - zestaw do samodzielnego montażu
Brak towaru
Adapter SOIC służy do testowania układów w obudowach SMD. Miejsce na stabilizator umożliwia dobranie napięcia zasilającego, a także zasilanie dodatkowych modułów. Moduł wyposażony jest w kondensator filtrujący oraz miejsce na bezpiecznik polimerowy. MOD-14.Z
Brak towaru
Moduł kamery firmy ArduCam z autofocusem przeznaczony dla Raspberry Pi. Został wyposażony w matrycę (Sony IMX219) o rozdzielczości 8 MPix oraz zintegrowany filtr IR. Do podłączenia kamery z Raspberry Pi jest realizowane za pomocą złącza CSI. Autofocus pozwala na ostrzenie w zakresie od 4 cm do nieskończoności. ArduCAM B0122
Brak towaru
Wyświetlacz LCD 4x16, 87x60mm, FSTN NEGATIVE, LED backlight (white), enhanced temperature range, RoHS
Brak towaru
RGB LED Satellite Module 004 (Circle)