- Out-of-Stock
The Satellite Module 003 is an RGB LED round “pixel” with three bright surface-mount RGB LEDs. This LED module is designed to be used with the OctoBrite DEFILIPPI to easily integrate full-color LED lighting into your next project.
![]() |
| Using an OctoBrite to control the color and brightness of multiple satellite modules. |
|---|
The 003 and 004 satellite modules from Macetech have three bright surface-mount RGB LEDs. You can use a string of satellite modules to create custom lighting projects, such as for holiday decorations or art displays.
These satellite modules are designed for use with the OctoBrite DEFILIPPI and a 12 V power supply. An OctoBrite can control the individual color and brightness of up to 8 satellites in response to commands from a controller such as an Arduino or Maestro. Satellite modules can be easily connected to the OctoBrite using a 6-conductor ribbon cable with 2×3 IDC connectors.
Note that though the satellite modules are designed for use with the OctoBrite, you can also use them with ShiftBars (one module per ShiftBar), or you can power the red, green, and blue LEDs directly using a 9 – 11 V supply. The three RGB LEDs are connected in series (so all three LEDs will always have the same color), and a resistor on each channel limits its current to about 20 mA at 11 V. The LED channels have a common anode, which is connected to the unlabeled satellite module pins.
The rectangular 003 satellite module is 2.8" × 0.34" and has 0.125" mounting holes spaced 1" apart. The round 004 satellite module is 1.45" in diameter and has 0.125" mounting holes on 0.85" triangular spacing.
|
|
For a brighter RGB LED module in a similarly small package, consider the Satellite Module 001. For an RGB LED with a built-in driver, consider the ShiftBrite.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
WM8960 stereo codec module with driver for 1W class D speakers and headphones. It uses the I2S interface and the I2C bus to configure the system. SparkFun BOB-21250
No product available!
MP3 player module controlled by I2C interface or switching inputs. It is based on a 1.4 W audio amplifier. The board has a 3.5 mm audio output and a connector for connecting a loudspeaker. Files are played from a microSD card. SparkFun DEV-19030
No product available!
A set with an adapter dedicated to the FLIR Lepton thermal imaging camera and the Lepton FS camera. It has been pre-configured to operate as a plug-and-play UVC 1.0 USB camera, it can also communicate via UART and I2C interface. SparkFun DEV-20813
No product available!
Motion detection module featuring Panasonic\'s EKM series PIR sensor. The EKM series is optimised for detecting small movements and is ideal for detecting movement in a small area around the sensor. It offers digital output in 32 zones with a detection distance of 5 m and a detection area of 90° x 90°. SparkFun SEN-22000
No product available!
Antenna dedicated to communication in LoRa networks in the 868 MHz frequency band. Equipped with an RP-SMA connector. SparkFun WRL-18082
No product available!
Sensor module for electromyography (EMG). Allows muscle activity to be studied and used to control devices. SparkFun DEV-21265
No product available!
Portable soldering iron with a power of 65 W. It has an adjustable operating temperature in the range of 50 ° C to 400 ° C. It can be powered via a DC or USB type C connector. The set includes a soldering iron and a BC2 tip. MiniWare TS101 (BC2) Blue
No product available!
Flexible 25 cm microSD to SD adapter. Supports all card capacities and types including: 16GB, 32GB, 64GB, 128GB Micro SD/SDHC
No product available!
DAC converter with built-in headphone amplifier. It is powered by DC 5V/1A and can work with various power sources, ensuring operational stability and excellent sound quality. DAC-Q3 Pro
No product available!
The digital meter with smart testing function is an advanced measuring device that offers a wide range of functions and capabilities. It is compact and portable and complies with safety standards for accurate and reliable measurement results.
No product available!
Module with USB type C connector designed for prototyping devices. The pins have been led out on the connector with a raster of 2.54 mm, which greatly facilitates the use of USB type C, e.g. with breadboards. SB Components 27330
No product available!
Adapter designed for Raspberry Pi minicomputers. It facilitates access to all pins, which are led out on the connector with a raster of 2.54 mm, which allows the use of a breadboard. SB Components 14927
No product available!
The most popular Sn60Pb40 SW26 solder is a high-quality lead product with SW26 flux, intended for professional soldering in electronics and electrical engineering, meeting the EN ISO 9453:2014 standard
No product available!
The most popular Sn60Pb40 SW26 solder is a high-quality lead product with SW26 flux, intended for professional soldering in electronics and electrical engineering, meeting the EN ISO 9453:2014 standard
No product available!
M5Stack series development board equipped with ESP32-S3 WiFi module. It will work well in projects related to IoT, as a STEM educational module or in Smart Home devices. M5Stack S007
No product available!
YATO 18 V drill/driver equipped with speed regulation. It has a built-in LED light, a 4-stage battery indicator and protection against overheating. It is suitable for drilling in metal and wood, as well as for driving screws. Yato YT-82782
No product available!
RGB LED round “pixel” with three bright surface-mount RGB LEDs. This LED module is designed to be used with the OctoBrite DEFILIPPI to easily integrate full-color LED lighting into your next project. Pololu 1245