This module allows independent control of two Omron G5LE-14-DC12 SPDT relays, supporting currents up to 10A. Thanks to built-in BSS138K MOSFETs, it can be controlled directly from 3.3V or 5V development boards such as Arduino or Raspberry Pi. Each channel is equipped with an LED to indicate relay activation and 5mm screw terminals for convenient circuit connection. Pololu 5666

A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5444

This module allows independent control of two Omron G5LE-14-DC5 SPDT relays, supporting currents up to 10A. Thanks to built-in BSS138K MOSFETs, it can be controlled directly from 3.3V or 5V development boards such as Arduino or Raspberry Pi. Each channel is equipped with an LED to indicate relay activation and 5mm screw terminals for convenient circuit connection. Pololu 5665

A compact board that allows for easy connection of a standard SPDT "sugar cube" relay in electronics projects. An integrated MOSFET transistor allows for relay control using a 2.5V to 20V logic signal, and two LEDs indicate its status. The module is equipped with a 3-pin JST SH connector and 5mm terminal holes for easy installation and integration with microcontrollers. Pololu 5664

Module with ToF VL53L5CX sensor with a matrix of 64 pixels and a range of up to 4 m. Communicates via the I2C interface. Pololu 3417

The compact (0.4″ × 0.5″) D24V5F1 synchronous buck voltage regulator takes input voltages between 3 V and 36 V and efficiently reduces them to 1.8 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 75% and 90%. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.

The compact (0.4″ × 0.5″) D24V5F6 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 6 V while allowing for a maximum output current of 500 mA. Pololu 2844

The compact (0.4″ × 0.5″) D24V5F12 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V while allowing for a maximum output current of 500 mA.

Step-Down Voltage Regulator D24V25F5. Pololu 2850

Step-Up/Step-Down converter module based on the S13V10F5 system. It has an input voltage from 2.8 to 22 V and an output voltage of 5 V. The current efficiency of the converter is up to 1 A. Pololu 4083

Standard analog servo with plastic gear. It has a 180° range of motion and derived feedback output. Pololu 3442

Module with DC motor driver DRV8256E. It can work with motors supplied with the voltage from 4.5 to 48 V and the current consumption up to 1.9 A. Pololu 4038

This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.

These lightweight aluminum brackets make it easy to mount and integrate the Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors into your project. The brackets are strong enough to hold their position, but they can also be bent by hand to different angles if the application calls for it.

This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

A single-channel DC motor controller with a UART TTL interface. It is powered from 1.8 V to 22 V and can deliver up to 1.8 A of current. Board with soldered connectors. Pololu 5076

Motor with 20 mm diameter and 43 mm length, 63:1 metal gear, 6 V operating voltage, 0.15 A to 2.9 A power consumption, 230 RPM speed and 4 kg*cm maximum torque. Pololu 3714

This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.

A two-channel DC motor controller with an I2C interface. It is powered from 1.8 V to 22 V and can deliver up to 1.6 A per motor. Board with soldered connectors. Pololu 5078

A two-channel DC motor controller with a UART TTL interface. It is powered from 1.8 V to 22 V and can deliver up to 1.6 A per motor. Board with connectors. Pololu 5080