Pololu is a U.S.-based manufacturer of high-quality electronic and mechanical components used in robotics, automation, and embedded systems. The company specializes in motor controllers, sensors, power modules, and development boards, which are widely applied in professional control systems as well as educational and hobbyist projects. With advanced technology and high reliability, Pololu products are trusted by engineers and IoT developers worldwide.
There are 1453 products.
3-pin cable with a length of 30 cm and 28 AWG. A one-sided JST ZH 3-pin female connector that is compatible with the 3-pin connector of the Sharp GP2Y0A51 analog distance sensors. Polol 2411
No product available!
This shunt regulator can protect power supplies from voltage spikes generated by motor controllers they are connected to. This version has a fixed set point of 33.0 V, a shunt resistance of 32.8 ohms, and four SMT shunt resistors populated on one side of the PCB.
No product available!
This shunt regulator can protect power supplies from voltage spikes generated by motor controllers they are connected to. This version has a fixed set point of 33.0 V, a shunt resistance of 4.10 ohms, and a total of 32 SMT shunt resistors populated on both sides of the PCB (this is the higher-power version).
No product available!
This shunt regulator can protect power supplies from voltage spikes generated by motor controllers they are connected to. This version has a precision-adjustable set point (4 V to 35 V), a shunt resistance of 4.10 ohms, and a total of 32 SMT shunt resistors populated on both sides of the PCB.
No product available!
Pololu G2 24v12 High Power is a miniature DC motor controller. Driver\'s power supply: 6.5 ... 30V. Current capacity of the module: 12A. The module has protection against back voltage and overvoltage. Pololu 1365
No product available!
Pololu G2 24v19 High Power is a miniature DC motor controller. Driver\'s power supply: 6.5 ... 40V. Current efficiency of the module: 19A. The module has protection against back voltage and overvoltage. Pololu 1367
No product available!
Extension board with stepper motor controller based on the STSPIN820 system. Ideally suited for use, among others in 2D / 3D printers, robots, cameras. Pololu 2879
No product available!
Standard analog servo with plastic gear. It has a 180° range of motion and derived feedback output. Pololu 3441
No product available!
Micro analog servo with plastic gear. It has a range of motion of 120° and a derived feedback output. Pololu 3436
No product available!
Module with 16 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4256
No product available!
A set of two optical quadrature encoders for Polol micromotors with a two-sided extended shaft, compatible with the LP, MP, and HP series, 5V power supply. Polol 2590
No product available!
A small, powerful motor with 5: 1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 6800 RPM, maximum torque of 0.09 kg * cm and carbon brushes for extra durability. Pololu 3036
No product available!
Sub-Micro servo powered by 4.8-6V, with a maximum torque of 0.7kg/cm (with 6V power supply) with position feedback. Pololu 3438
No product available!
Large servo with dimensions 62.8 × 32.5 × 55.9 mm and weight 180g. It has a torque of 40kg*cm (with a supply voltage of 7.4V). Equipped with a standard 3-pin connector matching most popular modeling controllers and an additional pin indicating the position of the servo. Pololu 3446
No product available!
Prototype contact plate 400 points, dimensions 82 x 53 mm. In the middle of the plate there are mounting holes, which allows its use in connection with the Romi Chassis chassis. Pololu 4000
No product available!
A pair of 66x10mm silicone tires compatible with Pololu 80×10mm/90×10mm wheels. Pololu 3410
No product available!
Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049
No product available!
Motor with 25 mm diameter and 65 mm length, 20,4:1 metal gear, 12 V operating voltage, 0,3 A to 5,6 A power consumption, 500 RPM speed, 6 maximum torque and 48 CPR encoder. Pololu 4843
No product available!
Motor with 37 mm diameter and 73 mm length, 150:1 metal gear, 12 V operating voltage, 0,2 A to 5,5 A power consumption, 67 RPM speed, 49 maximum torque and 64 CPR encoder. Pololu 2828
No product available!
Miniature, 12 V brush DC motor with metal gear and 15.25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft with a length of 9 mm and a diameter of 3 mm. Pololu 4788
No product available!
Pololu offers a wide range of motor controllers that enable precise motion control in robotics and automation systems. The product lineup includes controllers for DC motors, stepper motors, and servos, ensuring stable operation and broad compatibility with popular microcontrollers such as Arduino and Raspberry Pi. Pololu controllers support both simple DC motors and more advanced electric motors, featuring H-bridges, voltage regulators, and encoders for precise speed and position control.
Pololu provides distance sensors, gyroscopes, accelerometers, and line sensors that allow for environmental monitoring and obstacle detection in autonomous systems. The company also offers EMG sensors for bioelectrical signal analysis and motion tracking sensors. With low latency and high accuracy, Pololu sensors are widely used in robotics, medical applications, and industrial automation.
Pololu designs efficient step-up and step-down voltage regulators that ensure stable power supply in mobile and stationary systems. These products offer high energy efficiency and support various input voltage ranges, making them ideal for powering motors, microcontrollers, and control modules.
Pololu manufactures development boards based on ATmega microcontrollers that are fully compatible with the Arduino IDE. This allows users to easily program and test their applications. These modules support popular communication interfaces such as SPI, I2C, and UART and provide extensive expansion options through GPIO connectors.
Pololu products are widely used in mobile robots, monitoring systems, 3D printers, and industrial automation. Thanks to their high precision and reliability, Pololu motor controllers are used by both hobbyists and professional engineers to build modern, digitally controlled systems.
With an innovative approach to motion control systems, precise sensors, and power management modules, Pololu is a leader in robotics and automation. The company continuously develops its products, adapting to evolving technological demands and introducing new solutions that enhance energy efficiency and motion precision. Pololu is the ideal choice for anyone seeking high-quality components for electronics, robotics, and control systems.
