MYD-IMX287 Development Board

MYD-IMX28X Development Board

Description

The MYD-IMX28X Development Board designed by MYIR is a cost-effective and power-efficient ARM Evaluation Kit (EVK) for Freescale i.MX28 family of multimedia applications processors which has an ARM926EJ-S Core, with speed up to 454 MHz. The board can support running Linux operating systems, which allows developers to use it as an i.MX28 reference platform to quickly start their own design. The board takes full features of the i.MX28 ARM processor and has exposed a comprehensive set of peripherals and connectivity options to make the board suitable for smart gateways, human-machine interfaces (HMIs), handheld devices, scanners, portable medical, experimental education and more other industrial applications.

The MYD-IMX28X Development Board is using the MYC-IMX28X CPU module as the heart of the system which is an ARM9-based system-on-module (SOM) integrated with the i.MX28 processor, 128MB DDR2 SDRAM, 256MB Nand Flash and Ethernet PHY. It is connected to the base board through two 1.27mm pitch 80-pin connectors. The base board has extended many peripherals and interfaces through headers and connectors, featuring 1 x RS232, 1 x Debug, 2 x USB ports, up to 2 x Ethernet, 2 x CAN, 1 x RS485, TF, Audio, LCD, JTAG, etc.



MYIR offers the board with Freescale i.MX283 or i.MX287 ARM9 CPU by default; user can integrate a different MYC-IMX28X CPU module on the same base board, thus making two variants of i.MX28 evaluation boards.

MYD-IMX283 Development Board – with MYC-IMX283 CPU Module for Freescale i.MX283

MYD-IMX287 Development Board – with MYC-IMX287 CPU Module for Freescale i.MX287

The MYD-IMX283 and MYD-IMX287 boards only have a few differences as described in below table:

The MYD-IMX28X board comes with Linux2.6.35 software packages, detailed documents, necessary cable accessories as well as optional 4.3- and 7-inch LCD (with resistive or capacitive touch screen) to provide a complete Freescale i.MX28 starter kit and enable a quickly start of evaluation of i.MX28 family applications processors.

Features

Mechanical Parameters

• Dimensions: 140mm x 90mm (base board), 62mm x 38mm (CPU Module MYC-IMX28X)
• PCB Layers: 4-layer design (base board), 6-layer design (CPU Module MYC-IMX28X)
• Power supply: +5V
• Working temperature: -20~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)

OS Support

• Linux 2.6.35

The MYD-IMX28X Controller Board (MYC-IMX28X CPU Module)

Processor
Freescale i.MX283, i.MX287 Applications processor

• Up to 454MHz ARM926EJ-STM core with 16KB/32KB I and D Cache
• 128 kbytes of integrated low-power on-chip SRAM
• 128Kbytes of integrated mask-programmable on-chip ROM
• 1280 bits of on-chip one-time-programmable (OCOTP)ROM
• 16-bit mobile DDR (mDDR) (1.8V),DDR2 (1.8V) and LV-DDR2 (1.5V), up to 205MHz DDR clock frequency with voltage overdrive
• Support for up to eight NAND Flash memory devices with up to 20-bit BCH ECC

Memory

• 128MB DDR2 SDRAM
• 256MB Nand Flash
• 128KB SPI Data Flash

Peripherals and Signals Routed to Pins

• On-board Ethernet PHY
• One power indicator (Red LED)
• One user LED (Blue)
• Two 1.27mm pitch 2 x 40-pin SMT male expansion connectors can carry out interfaces below:
  • Ethernet (two for i.MX287, one for i.MX283)
  • 2 x USB2.0 OTG ports
  • Up to 4 x Serial ports
  • 1 x I2C
  • 2 x SPI
  • Up to 8 x ADC (one high-speed ADC, seven low-resolution ADC)
  • Up to 5 x PWM
  • 1 x SDIO

The MYD-IMX28X Base Board (MYB-IMX28X)

Serial ports

• 1 x 3-wire RS232 Debug serial port (DB9)
• 1 x 5-wire RS232 serial port (UART0)
• 1 x RS485

USB

• 1 x USB2.0 Host port
• 1 x USB2.0 OTG port
  • 10/100Mbps Ethernet interfaces (two for i.MX287, one for i.MX283)
  • 2 x CAN interfaces (only for i.MX287)
  • 1 x TF card slot
  • 1 x LCD interface (16-bit true color, supports optional 4.3-inch and 7-inch TFT LCD)
  • 1 x 4-wire resistive touch screen interface
  • 1 x Audio input port (3.5mm jack)
  • 1 x Audio output port (3.5mm jack)
  • 1 x Headphone output port (3.5mm jack)
  • 1 x Mic In interface
  • 1 x Buzzer
  • 1 x 2.54mm pitch 20-pin JTAG interface
  • 4 x Buttons (1 x Reset button, 3 x User buttons)
  • 2 x User LEDs (Blue)
  • 2 x 2.0mm 20-pin expansion connectors
• 3 x ADC (one high-speed ADC, two low-resolution ADC)
• 1 x SPI
• 2 x I2C
• 3 x UART
• 3 x PWM