KAmodMPL3115A2 is a module with an atmospheric pressure sensor MPL3115A2 from NXP. Sensor allows to make a measurement in the range of 200...1100hPa (20...110kPa). Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMPL3115A2

KAmod RS232S-ALL is a 3-5.5V RS232 to TTL converter supporting all RS232 signals, offering standard DB9 and Phoenix MC 3.81 connectors and 2.54mm goldpins, based on the MAX3238/SP3238 and providing ESD protection up to 15kV

KAmod I2C Hub4 enables splitting the I2C bus into four independent outputs with a voltage level translation function, eliminating address conflicts and increasing connection flexibility. The module is intended for projects with multiple I2C devices requiring separation or diverse supply voltages.

Simulation set for Siemens S7-1200 PLC devices. Using this set, it is possible to verify the operation of a program written for a PLC by applying the appropriate states to the digital inputs, to the analogue (ADC) inputs voltages from the built-in or external sensors. LED status monitoring is possible

TTL - RS485 converter 5V. RS485 interface on 5.08mm screw terminal and 2.54mm pitch connector.

Miniature KAmod RP2040 module with Raspberry RP2040 microcontroller and 16 MB flash memory provides high computing performance in a compact format. Suitable for educational, hobbyist, and prototyping applications of devices with USB, I2C, SPI, and UART communication.

KAmod DMX512 is a DMX signal converter that enables communication between a computer and a stage lighting system. It is equipped with full galvanic isolation, supports up to 512 devices, has a transmission range of 1200 m, is powered via a USB-C port, and is compatible with various programs, making it ideal for professional use in theaters, clubs, and concerts

The KAmod USB-Micro Adapter Module allows for the connection of a Micro-USB port to almost any electronic system. All necessary signals are available on the pin header, including 5V power, D+ and D- data lines, and an additional ID signal.

KAmodRPi Zero 2Relay is a module with two SPDT relays in the form of a Raspberry Pi Zero add-on, enabling control of external loads in automation and control projects. Thanks to optoisolation and flexible GPIO configuration, it ensures safety and easy system integration.

The KAmod RPi Zero Proto board intended for prototyping systems with Raspberry Pi Zero facilitates creating connections thanks to a 2.54 mm hole grid and GPIO, I2C, UART, and power outputs. It works well for building test projects and in education.

KAmod RS232S-mini is a miniature RS232 to TTL converter with a female DB9 connector, 2.54 mm goldpin pins, operating at 3-5.5 V, supporting all RS232 signals, based on the MAX3238/SP3238 chip, offering ESD protection up to 15 kV and corresponding to a DCE/Modem device

The KAmod BlackPico STM32G030 board, based on the STM32G030F6P6 microcontroller, offers extended communication and signal processing capabilities in a compact form factor. Suitable for embedded, educational, and industrial projects, it enables rapid development using popular toolchains.

The KAmodRPi5 DAC module with PCM5102 chip provides high-quality digital-to-analog audio conversion from I2S signals. Suitable for Raspberry Pi audio projects and as a standalone DAC in systems using I2S audio transmission.

This universal expansion board for the Raspberry Pi Pico extends GPIO pins to both male and female goldpin connectors and screw terminals with labeled pins, facilitating and accelerating prototyping without the need for soldering

KAmodLPS25HB is a module that allows the measurement of atmospheric pressure in the range of 260-1260hPa with a resolution of 0.01hPa, and thanks to the embedded regulator and voltage translator levels, it can be successfully used in systems supplied with a voltage of 2.5 - 5.5 V.

KAmod RS232H-ALL is a RS232 to TTL signal converter, supporting all RS232 interface signals, based on the MAX3243/SP3243 system, with a TTL side voltage of 3-5.5 V, a maximum transmission speed of 250 kbps, ESD protection up to 15kV HBM, a standard DB9 connector, a Phoenix MC 3.81 connector and 2.54 mm goldpin pins, with a board size of 65x30 mm (72x30 mm with a DB9 connector

KAmodDIGIpot is a miniature digital potentiometer module. It allows, by means of two PU / PD inputs, to change the resistance value between the outputs A, W, B (compatible with the outputs of the analog potentiometer), using buttons or outputs of the microcontroller. Adjustment in 32 steps, value 10k.

1-channel relay module with optoisolation and configurable triggering is a versatile solution for load control in microcontroller projects. Thanks to its compact design and stable connectors, it is suitable for automation and prototyping applications.

RS485 bus transceiver controlled via USB, equipped with FT230 chip, USB-C connector, ST485BDR controller for 64 devices, galvanic isolation, overvoltage protection and RS485 bus terminator option, ensuring effective and safe communication in industrial systems

The KAmod RPI5-Proto universal board is an accessory designed for the Raspberry Pi 5, offering a grid of metalized holes in a 2.54 mm pitch and GPIO pins and I2C, SPI and UART interfaces, which makes it easy to create simple electronic circuits