Miniature Step-Down converter module with AP63300, input voltage 3.5-32 V, selectable output voltage 3.3 V, 5 V or 12 V, maximum continuous current 1 A, peak current up to 2 A, dimensions 24 x 16 mm. Kamami KAmod DCDC AP63300

Single board computer with STM32F207VE microcontroller (ARM Cortex-M3, 512 kB Flash, 128 kB RAM, LQFP100).

KAmodMMA8451Q is a module with the MMA8451Q three-axis accelerometer from NXP. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMMA8451Q

ISP Atmel 6-pin ISP Atmel 10-pin adapter

Kamod BluePill+ is a modern development board with STM32F103 microcontroller, equipped with SPI, I2C, UART interfaces, two 12-bit ADC converters and USB-C connector, ideal for creating projects based on ARM Cortex-M3 architecture

KAmodPCA9533 is a module with LED driver from NXP. The module allows you to control the brightness of 4 LEDs using programmable PWM signals (with a frequency from 0.591 Hz to 152 Hz). I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector

KAmodRPi400-ADP is a board designed for a Raspberry Pi 400 and Raspberry Pi 500 computer that allows you to conveniently connect modules designed for older versions of the Raspberry. Moreover, it allows to connect modules equipped with Pmod and Kamami I2C connectors.

KAmodNFC is an expansion board with M24LR64E-R chip – dynamic tag with 64kb EEPROM memory and dual communication interface (I2C/RF). On board is placed also signalization of energy harvesting function, which is in M24LR64E-R chip embedded.

The KAmodRPi Zero Rel+Pow module enables powering the Raspberry Pi ZERO from a wide voltage range and expands its capabilities with two relay channels and an I2C Qwire interface. The compact form and wide functionality make it an ideal solution in automation projects, IoT and control systems.

KAmod I2C Hub8 enables splitting the I2C bus into eight independent channels with a voltage translation function, which allows effective integration of multiple devices with repeating addresses. The module is recommended for advanced microprocessor projects with bus separation requirements and diverse voltage levels.

KAmodHTS221 is a module that allows the measurement of humidity and temperature, and thanks to the built-in stabilizer and translator levels, it can be successfully used in systems supplied with a voltage of 2.5 - 5.5 V

Module for Raspberry Pi with two RS485 interfaces, controlled via SPI, featuring galvanic isolation, line protection, and communication support up to 500 kbps

A new programmer-debugger with the USB interface. It supports the STM32 microcontrollers via SWD interface. ZL30PRGv2-1 is compatible with the STMicroelectronics ST-Link/V2-1. It also has the function of USB-UART converter, thanks to which it can successfully replace the KAmodRS module.

The KAmod BluePico STM32F030 evaluation board includes the STM32F030F4P6 microcontroller and all necessary components for power supply, programming, and communication. Its compact size and versatile GPIO configuration make it suitable for educational use, prototyping, and embedded industrial applications.

KAmod Si7021 is a compact module with a digital temperature and humidity sensor, operated via the I2C interface, dedicated to environmental applications. Qwire connectors and the traditional 2.54 mm pitch provide easy integration with various hardware platforms.

A 30 cm long connecting cable (6 wires) designed for use with Kamami KAmod modules. It is terminated on both ends with a plug that fits the WF06S connector that KAmod modules are equipped with. cabhu06-30

KAmodMMA7361LC is an accelerometer module with an analogue output, equipped with the MMA7361LC chip. It has a embedded voltage regulator, so it can be used in systems supplied with voltage of 2.5...5.5V.

Module with digital thermal sensor, thermostat and I2C interface

KAmod CAN-TXRX is a CAN bus transceiver with the MCP2542FD system, compatible with the CAN 2.0 and CAN FD standards, enabling sending and reading data with the serial interface voltage level adjustable in the range of 1.7...5 V, equipped with protections and LEDs signaling action

Module with AT42QT1060 controller - contectless keyboard controller, Kamami, RoHS.