KAmodTEM
ID: 102922
5906623432288
zł19.90
Tax included
zł16.18 tax excl.
Module with digital thermal sensor, thermostat and I2C interface
Module with digital thermal sensor, thermostat and I2C interface
KAmodTEM makes it easy to use thermal sensor with any device equipped with I2C interface, it can also be used as thermostat.
Basic features:
- MCP9801 thermal sensor by Microchip
- Programmable sensor resolution: 9 to 12 bits
- Sampling frequency 4...33Hz
- Capable of reading temperatures from -55 to +125°C
- SMbus and I2C/400kHz interfaces
- 3 configurable address lines (up to 8 modules on one I2C bus)
- Address 1001xxx (xxx – A2/A1/A0 configurable by jumpers, default 000)
- Alert output (thermostat, open-drain)
- Supply voltage 2.7...5.5VDC
- Built-in pull-up resistors for I2C
- Built-in LED (for example can be used as alert indicator)
- I2C Kamami standard connector (compatible with most of Kamami evaluation boards)
- Dimensions: 30 x 50 x 15 mm
Standard equipment:
- Assembled module
102922
Data sheet
- Interface
- I2C
- Type of sensor
- MCP9801
- Power supply voltage
- 2.7..5.5V
- Sensor type
- Temperatury
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
Delivery date unknown
No product available!
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
Delivery date unknown
No product available!
Cables for evaluation boards, set of 10 pcs., green colour
zł5.46
24h
Available quantity: 213
Available
Available
Available
A 30 cm long connecting cable (4 wires) designed for use with Kamami KAmod modules. It is terminated on both ends with a plug that fits the WF04S connector that KAmod modules are equipped with. cabhu04-30
zł6.90
24h
Available quantity: 3
Available
Cables for evaluation boards, set of 10 pcs., yellow colour
zł5.61
24h
Available quantity: 33
Available
Cables for evaluation boards, set of 10 pcs., white colour
zł6.06
24h
Available quantity: 15
Available
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
zł5.97
Delivery date unknown
No product available!
Other products in the same category (16)
Module with the MCP9600 amplifier designed to work with a K-type thermocouple. The module has a PCC connector for connecting this type of thermocouple. I2C communication. SparkFun SEN-16294
zł146.78
24h
Available quantity: 1
Available
Module with the MCP9600 amplifier designed to work with a K-type thermocouple. The module has a screw connector for connecting this type of thermocouple. I2C communication. SparkFun SEN-16295
zł147.93
24h
Available quantity: 1
Available
Module with digital temperature sensor TMP102. It enables temperature measurement in the range from –40°C to 125°C with an accuracy of 0.5°C. The system communicates via the I2C interface. SparkFun SEN-16304
zł32.75
24h
Available quantity: 1
Available
Module with digital temperature sensor TMP117. It enables temperature measurement in the range from –55°C to 150°C with very high accuracy up to ± 0.1°C. The system communicates via the I2C interface. SparkFun SEN-15805
zł80.13
3 weeks
No product available!
Module with temperature sensor MCP9808. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020556
zł25.76
24h
Available quantity: 3
Available
Temperature sensor in the form of a HT-NTC100K thermistor on a 1 m cable. Designed for 3D printers
zł5.40
4 weeks
No product available!
Module with MLX90615 temperature sensor with a measurement accuracy of 1°C and a resolution of 0.02°C. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020077
zł173.93
24h
Available quantity: 1
Available
The module with the MCP9600 amplifier is designed to work with a thermocouple. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020594
zł79.57
4 weeks
No product available!
The module with the MAX31850K amplifier is designed to work with a thermocouple. The board is equipped with a Grove connector and communicates via 1-Wire. Seeed Studio 101020555
zł82.45
24h
Available quantity: 2
Available
Module with OTP-538U non-contact temperature sensor. The board is equipped with a Grove connector and has analog outputs. Seeed Studio 101020062
zł63.41
24h
Available quantity: 3
Available
Module with MLX90614 temperature sensor with a measurement accuracy of 0.2°C and a viewing angle of 35°. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020895
zł171.47
24h
Available quantity: 1
Available
Module for high temperature measurement with a range from -200°C to 700°C dedicated to a probe with a K-type thermocouple. Communication via SPI. SparkFun SEN-13266
zł92.08
24h
Available quantity: 2
Available
Module with a precise temperature sensor MCP9808. It is supplied with the voltage ranging from 2.7 to 5.5 V and communicates via the I2C interface
zł26.88
24h
Available quantity: 4
Available
The module with the MCP9600 amplifier is designed to work with the thermocouple type K, J, T, N, S, E, B and R. It has a screw connection and communicates via the I2C interface. Pimoroni PIM437
zł138.08
4 weeks
No product available!
Set of sensors with cables. They can detect gestures, movement, touch, sound, and measure humidity, temperature, altitude and acceleration. SparkFun DEV-16156
zł815.50
3 weeks
No product available!
The module with the MCP96L01 amplifier designed to work with a thermocouple type K, J, T, N, S, E, B, or R. It has a screw connection for connecting a thermocouple and communicates via I2C. Adafruit 5165
zł86.57
24h
Available quantity: 3
Available
Module with digital thermal sensor, thermostat and I2C interface