New products
New products New products
zł301.74
24h
Dostępny
Available
Available
zł59.04
24h
Available
Grove Single-Point Infrared Thermometer - module with a temperature sensor MLX90614 (FoV 35°)
ID: 583260
5906623416042
zł171.47
Tax included
zł139.41 tax excl.
Module with MLX90614 temperature sensor with a measurement accuracy of 0.2°C and a viewing angle of 35°. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020895
Description
Module with MLX90614 temperature sensor, which enables measurement in the range from -70°C to 380°C with high accuracy down to 0.2°C. It is a single-point, medical-grade sensor with a 35° viewing angle, which allows e.g. to measure body temperature. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the I2C interface and is supplied with the voltage from 3.3 V to 5 V.
Features
- Measurement range: -70°C to 380°C
- Measurement accuracy: ± 0.2°C
- Viewing angle: 35°
- Refresh rate: 0.5Hz to 64Hz
- I2C interface
- Supply voltage: 3.3 V to 5 V
- Current consumption: 18 mA
- Dimensions: 40 x 20 x 16 mm
- Weight: 11 g
583260
Data sheet
- Interface
- I2C
- Type of sensor
- inny
- Power supply voltage
- 3,3 - 5 V
- Sensor type
- Bezdotykowy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 26
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Regular pricezł207.92zł188.92
24h
Available quantity: 29
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 21
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Module with OTP-538U non-contact temperature sensor. The board is equipped with a Grove connector and has analog outputs. Seeed Studio 101020062
zł63.41
24h
Available quantity: 3
Available
Other products in the same category (16)
A sensor that detects the oxygen concentration. Equipped with a factory calibrated probe. It communicates via the UART interface or the analog output. Seeed Studio 101020912
zł539.04
4 weeks
No product available!
Module with a passive buzzer. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 107020109
zł12.71
4 weeks
No product available!
Module with RGB LED diode. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020048
zł32.58
4 weeks
No product available!
Module with green LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030007
zł12.71
24h
Available quantity: 2
Available
Module with the MQ3 alcohol concentration sensor. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020006
zł19.90
4 weeks
No product available!
Module with LED driver. It can control LED strips with a length of 1 to 2 meters at a voltage of 9 V or from 1 to 5 meters at a voltage of 12 V. Seeed Studio 105020002
zł54.85
24h
Available quantity: 3
Available
Module with RGB diode and P9813 controller. It is powered with the voltage of 5 V and controlled by the I2C interface (Grove). Seeed Studio 104030006
zł18.12
24h
Available quantity: 2
Available
A volume sensor designed to detect loud ambient sounds. The module uses a microphone and LM2904 amplifier. The output value (analog signal) depends on the volume of the detected sound. In order to eliminate interference, the microphone signal is subjected to double filtering. Seeed studio 101020063
zł35.89
24h
Available quantity: 1
Available
Module with a gas concentration sensor MQ9, which enables the detection of carbon monoxide and combustible gases (methane, propane). The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020045
zł55.71
24h
Available quantity: 3
Available
Module with RGB LED, it is possible to control individual colors using digital signals as well as PWM signals. The module has a connector in accordance with the Grove standard. Seeed studio 101020472
zł21.33
24h
Available quantity: 2
Available
Waterproof strip with RGB LED diodes, 1 m long (30 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020108
zł32.75
24h
Available quantity: 2
Available
Module with 42 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020173
zł120.42
24h
Available quantity: 1
Available
Module with a 3-axis BMA400 accelerometer with a measuring range up to ± 16g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020582
zł49.72
24h
Available quantity: 3
Available
The expansion module is designed for micro:bit v2. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103100063
zł58.30
24h
Available quantity: 2
Available
Module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C and SPI interface. Seeed Studio 104020250
zł62.69
24h
Available quantity: 1
Available
A small module with a temperature sensor (thermistor). As the temperature changes, the resistance of the thermistor changes, which allows the temperature to be measured in the range from -40 to 125 ° C with an accuracy of 1.5 ° C. The module has a connector in accordance with the Grove standard. Seeed studio 101020015
zł15.36
24h
Available quantity: 2
Available
Module with MLX90614 temperature sensor with a measurement accuracy of 0.2°C and a viewing angle of 35°. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020895