- Obecnie brak na stanie

Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Solid Blue
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
![]() |
Dagu Rover 5 chassis with Orangutan SVP robot controller and additional electronics mounted to an RP5/Rover 5 expansion plate (narrow). |
---|
![]() |
Two RP5/Rover 5 expansion plates with an Orangutan SV-328 and an Arduino Duemilanove. |
---|
![]() |
Pololu RP5/Rover 5 wide expansion plate with a TReX Jr. and an RC receiver. |
---|
![]() |
A narrow RP5/Rover 5 expansion plate with an Orangutan SV-328 and a Sharp digital distance sensor. |
---|
This 1/8" acrylic expansion plate lets you mount a variety of components to your Rover 5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components. The slot size and spacing is compatible with the many Tamiya mechanical sets that have 3 mm holes spaced 5 mm apart. Included with the plate are four tapping screws for mounting the plate to the Rover 5 tracked chassis.
These plates were originally designed for our now-discontinued RP5 chassis, but they are also compatible with the Dagu Rover 5. However, we have noticed a misalignment between the mounting holes on the expansion plate and the Rover 5, so you might only be able to secure the plate with two screws on opposing corners. These plates can also be used on their own as chassis for custom-built robots.
The Pololu RP5/Rover 5 expansion plate comes in both narrow and wide versions. The narrow plate (RRC07A) is 6.8" x 3.1" (17.2 x 8.0 cm) and covers the main plastic housing of the Rover 5 chassis. The wide plate (RRC07B) is 6.8" x 5.0" (17.2 x 12.7 cm).
Both the narrow and wide expansion plates are available in a variety of colored (and clear) acrylics:
![]() |
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Solid Blue |
Osoba odpowiedzialna BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Brak towaru
PŁYTA EWALUACYJNA I KLAWIATURA MUZYCZNA MIDI - PŁYTKI DRUKOWANE I ZAPROGRAMOWANY UKŁAD - PŁYTKA DRUKOWANA
Brak towaru
Zestaw startowy FPGA z układem Intel Stratix 10 GX. Moduł posiada zintegrowane urządzenia nadawczo-odbiorcze, które przesyłają dane z prędkością do 28,3 Gb/s, dzięki czemu DE10-Pro jest w pełni zgodny z wersją 3.0 standardu PCI Express. DE10-Pro oferuje szybką pamięć równoległą Flash i cztery gniazda SO-DIMM, które obsługują 8 GB DDR4 SDRAM. Terasic P0628
Brak towaru
Brak towaru
Zmontowany powolny rozjaśniacz do taśm LED 12V. AVT1975 C
Brak towaru
32-bitowy mikrokontroler z rdzeniem ARM Cortex-M0, XMC1200, 32kB Flash, TSSOP-28, Infineon
Brak towaru
Brak towaru
Płytka PCB i zaprogramowany układ do symulatora świtu i zmierzchu. AVT5480 A+
Brak towaru
Hardware extension adds Narrow Band 868 MHz radio communication capability to Open4, EvoPrimer and STM32 Primer2 platforms
Brak towaru
Taśma połączeniowa przeznaczona do kamer dla komputerów Raspberry Pi o długości 30 cm. Adafruit 1648
Brak towaru
Terenowe podwozie Dagu Wild Thumper 4WD w kolorze czarnym, w komplecie koła o średnicy 120mm oraz silniki z przekładnią 34:1. Podwozie jest wykonane z blachy aluminiowej, otwory o średnicy 4mm rozmieszczone co 10mm umożliwiają montaż kontrolera oraz akcesoriów. Pololu 1566
Brak towaru
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Solid Blue