- Out-of-Stock

Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Solid Blue
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
![]() |
Dagu Rover 5 chassis with Orangutan SVP robot controller and additional electronics mounted to an RP5/Rover 5 expansion plate (narrow). |
---|
![]() |
Two RP5/Rover 5 expansion plates with an Orangutan SV-328 and an Arduino Duemilanove. |
---|
![]() |
Pololu RP5/Rover 5 wide expansion plate with a TReX Jr. and an RC receiver. |
---|
![]() |
A narrow RP5/Rover 5 expansion plate with an Orangutan SV-328 and a Sharp digital distance sensor. |
---|
This 1/8" acrylic expansion plate lets you mount a variety of components to your Rover 5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components. The slot size and spacing is compatible with the many Tamiya mechanical sets that have 3 mm holes spaced 5 mm apart. Included with the plate are four tapping screws for mounting the plate to the Rover 5 tracked chassis.
These plates were originally designed for our now-discontinued RP5 chassis, but they are also compatible with the Dagu Rover 5. However, we have noticed a misalignment between the mounting holes on the expansion plate and the Rover 5, so you might only be able to secure the plate with two screws on opposing corners. These plates can also be used on their own as chassis for custom-built robots.
The Pololu RP5/Rover 5 expansion plate comes in both narrow and wide versions. The narrow plate (RRC07A) is 6.8" x 3.1" (17.2 x 8.0 cm) and covers the main plastic housing of the Rover 5 chassis. The wide plate (RRC07B) is 6.8" x 5.0" (17.2 x 12.7 cm).
Both the narrow and wide expansion plates are available in a variety of colored (and clear) acrylics:
![]() |
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Solid Blue |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
No product available!
No product available!
The HiFi Shield Plus provides both stereo RCA connectors and a 3.5mm stereo jack (all gold-plated) to connect to external amplifiers and other audio equipment. Via TI\'s high-end PCM5102 DAC chip (Burr-Brown) it supports 16, 24, 32 bit audio formats with minimal distortion -93dB and ideal dynamics 110dB+ plus amazing sampling rates of 384kHz
No product available!
No product available!
Electronic metal caliper with remarkable accuracy to hundredths of a millimeter. It has a measuring range of 150 mm.
No product available!
3D printer with automatic table levelling and print resume function. Equipped with a dual Z-axis and a filament sensor. It offers a large workspace of 220 x 220 x 250 mm and uses a Direct Drive extruder. Artillery Genius Pro
No product available!
No product available!
No product available!
A set of two aluminum brackets for mounting micro Pololu motors. Mounting screws included. Pololu 1599
No product available!
Electric tin extractor with 30W Velleman heater. It is equipped with a manual vacuum pump
No product available!
Development kit with SoC chip containing eight 64-bit ARM v8.2 cores and a Volt graphic layout consisting of 512 cores supporting CUDA, cuDNN and TensorRT technology. NVIDIA Jetson AGX Xavier Developer Kit
No product available!
Needle bending needle, for precise glue application, Flux 0.25mm internal diameter and 0,5144mm outside diameter
No product available!
Panasonic Eneloop PRO R6/AA rechargeable batteries with a minimum capacity of 2500mAh and a voltage of 1.2V. The set contains four pieces sold in a reusable packaging. Panasonic BK-3HCDE/4LE
No product available!
No product available!
Assembled radar using ultrasonic waves. AVT5550 C
No product available!
No product available!
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Solid Blue