Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. Pololu 3119

A4990 Dual Motor Driver Carrier

30:1 Micro Metal Gearmotor HP with Extended Motor Shaft

Miniature high-power motor from the Pololu MP series. Gear motor 250: 1, shaft speed is 90 rpm, torque is 3 kg * cm (0.3 Nm). The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2384

These lightweight aluminum brackets make it easy to mount and integrate the Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors into your project. The brackets are strong enough to hold their position, but they can also be bent by hand to different angles if the application calls for it.

Pololu 9V Step-Up Voltage Regulator U3V50F9

This is a breakout board for ON Semiconductor’s AMIS-30543 microstepping bipolar stepper motor driver, which features SPI-adjustable current limiting, 11 step modes (from full-step through 1/128-step), back-EMF feedback that can be used for stall detection or optional closed-loop control, and over-current and over-temperature protection. 

Miniature high-power motor from the Pololu MP series. 100: 1 gear motor,
the rotation speed of the shaft is 220 rpm, the torque is 1.5 kg * cm (0.15 Nm).
The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2381

This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 210.59:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

Pololu 4-Channel RC Servo Multiplexer (Partial Kit)

Black Edition offers adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions. It operates from 8 V to 35 V and can deliver up to 2 A per coil with sufficient additional cooling. Pololu 2128

Pololu Universal Aluminum Mounting Hub for 3mm Shaft Pair, 2-56 Holes

This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.

Replacement sprockets set for the Zumo robot in red. The kit includes two drive sprockets and two idle sprockets. The gears fit both Zumo V1.2 and Zumo 32U4 robots. Pololu 3128

Motor with 37 mm diameter and 68 mm length, 30:1 metal gear, 24 V operating voltage, 0,1 A to 3 A power consumption, 330 RPM speed, 15 maximum torque and 64 CPR encoder. Pololu 4692

A step-down converter module that allows you to reduce the input voltage from 5.1–36 V to a stable 5 V, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600 mA allows you to power microcontrollers, IoT modules, and other electronic systems. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5593

DC-DC step-up/step-down voltage regulator module with an adjustable output voltage range of 9 V – 30 V and an input voltage range of 2.9 V – 32 V. The circuit automatically boosts or lowers the input voltage, allowing it to power devices even when the supply voltage fluctuates significantly. The regulator can deliver up to 2 A output current, with a typical efficiency of 80–90%, and features an ENABLE pin for low-power operation. Pololu 2573

A modernized version of the popular Pololu 3pi mobile robot. The robot was based on the AVR ATmega32U4 microcontroller with the Arduino bootloader and OLED display. Assembled version. Pololu 4976

Dual-channel brushed DC motor controller with TTL and RS-232 serial interface enabling speed and direction control of two motors at 6–24 V supply voltage with up to 12 A continuous current per channel (30 A peak), designed for robotics, automation, and microcontroller-based projects. Pololu 2078

The step-down converter module allows you to reduce the voltage from 24-60 V to a stable 24 V at a current of up to 8 A. High efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device has built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5684