Main view
search
  • Main view
  • Full set
  • Assembled with connectors
  • Top view
ID: 1204129
5902186336407
zł135.35
Tax included

zł110.04 tax excl.

DC-DC step-up/step-down voltage regulator module with an adjustable output voltage range of 9 V – 30 V and an input voltage range of 2.9 V – 32 V. The circuit automatically boosts or lowers the input voltage, allowing it to power devices even when the supply voltage fluctuates significantly. The regulator can deliver up to 2 A output current, with a typical efficiency of 80–90%, and features an ENABLE pin for low-power operation. Pololu 2573

24h
Available
Available quantity: 2
Kamami is the official distributor of electronic modules and Pololu robotic parts. All products of this brand in our offer are original and come directly from the manufacturer.

Description

The Pololu S18V20AHV module is a DC-DC switching regulator of the step-up/step-down (buck-boost) type with an adjustable output voltage in the range of 9 V – 30 V. The circuit operates with an input voltage from 2.9 V to 32 V, with a recommended maximum operating voltage of 30 V, and can both increase and decrease the input voltage as required. The SEPIC (Single-Ended Primary Inductor Converter) topology enables stable regulation regardless of whether the input voltage is higher or lower than the output voltage. The typical maximum output current is approximately 2 A, while efficiency in most applications ranges between 80–90%, helping reduce energy losses and heat generation.

The module includes an ENABLE pin that allows the regulator to enter a low-power mode. In sleep mode, the quiescent current depends on the input voltage and can be reduced to tens of microamps. The regulator also features reverse-polarity protection, over-current protection, thermal shutdown (approx. 165°C), and under-voltage lockout. The output voltage is adjusted using an onboard trimmer potentiometer, and the manufacturer recommends keeping the sum of the input and output voltages below 55 V. The board supports multiple connection methods, including 5 mm screw terminal blocks, 2.54 mm header pins, or direct wire soldering. Four M2 mounting holes allow easy installation in electronic devices or enclosures.

Example efficiency graphs of the regulator for different output voltages are available for download in the “Resources” section.

            p1204129-0J5059.1200%20%281%29.png        p1204129-0J5038.1200.jpg

Features

  • Converter type: step-up / step-down (buck-boost, SEPIC)
  • Input voltage: 2.9 V – 32 V
  • Recommended maximum operating voltage: 30 V
  • Output voltage: 9 V – 30 V adjustable
  • Maximum output current: up to 2 A
  • Efficiency: 80–90% (typical)
  • No-load quiescent current: 1 mA – 5 mA
  • Maximum quiescent current: up to 25 mA
  • ENABLE pin for low-power operation
  • Reverse polarity protection
  • Over-current protection
  • Thermal protection
  • Under-voltage protection
  • Design recommendation: input voltage + output voltage below 55 V
  • Output voltage adjustment via trimmer potentiometer
  • Mounting holes: 4 × M2
  • Supports 2.54 mm header pins or 5 mm terminal blocks
  • Module dimensions: 43 × 21 × 10 mm
  • Weight: 7.5 g

Kit includes

  • Pololu S18V20AHV voltage regulator module
  • 2.54 mm header pin strip
  • 5 mm screw terminal block connectors
1204129

Data sheet

Output voltage
9 - 30 V
Output current
2A
Converter type
Step-down/step-up
Supply voltage min
2,9 V
Supply voltages max
32 V

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Other products in the same category (16)