zł10,639.61
.png)
New products
New products New products
Isolated DC-DC Power Module 5V/5.5V 300mA
ID: 1202571
5902186333451
zł18.62
Tax included
zł15.14 tax excl.
Isolated DC-DC power module designed for safe powering of sensitive electronic circuits, offering galvanic isolation up to 3kVRMS, 5V or 5.5V output voltage, and output current up to 300mA. Pololu 5414
Description
The isolated DC-DC power module is intended for applications that require galvanic separation between the power source and the load, significantly increasing operational safety and immunity to electrical interference. The solution is suitable for measurement systems, industrial automation, communication devices, and applications with multiple power sources, where eliminating ground loops is essential.
The module is based on the Texas Instruments UCC33420RAQR integrated circuit and provides galvanic isolation up to 3kVRMS between the input and output. An input voltage range of 4.5–5.5V enables direct compatibility with common 5V systems. The output delivers a regulated voltage of 5V or 5.5V, selectable via the SEL pin, with a maximum continuous output current of 300mA.
Integrated thermal, short-circuit, undervoltage, and overvoltage protections enhance operational reliability. The EN/FLT pin allows remote power enable control and fault indication. Compact PCB dimensions and a 2.54mm pin pitch enable direct mounting on breadboards and prototyping boards. Due to efficiency below 60%, sufficient power margin must be provided on the input side.
Features
- Type: isolated DC-DC power module
- Integrated circuit: Texas Instruments UCC33420RAQR
- Galvanic isolation: up to 3kVRMS
- Input voltage: 4.5 – 5.5 V
- Output voltage: 5 V (default) or 5.5 V (selected via SEL pin)
- Maximum output current: 300 mA
- Efficiency: < 60%
- Protections: thermal, short-circuit, undervoltage, overvoltage
- Control pin: EN/FLT – enable and fault indication
- Isolated grounds: GNDP (input), GNDS (output)
- Pin pitch: 2.54 mm
- PCB dimensions: 7.6 x 15.2 mm
1202571
Data sheet
- Output voltage
- 5 / 5,5 V
- Output current
- 300 mA
- Converter type
- Step-down/step-up
- Supply voltage min
- 4,5 V
- Supply voltages max
- 5,5 V
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Angled connector for through-hole assembly. 2.54mm pitch.
zł1.89
24h
Available quantity: 25083
Available
Other products in the same category (16)
The Step-Up/Step-DownS7V8F5 Buck Voltage Regulator module with output voltage 5V, input voltage range of 2.7-11.8V and a maximum output current of 0.5-1A. Pololu 2123
zł35.71
24h
Available quantity: 3
Available
The Step-Up/Step-DownS10V4F5 Buck Voltage Regulator module with output voltage 5V, input voltage range of 2.5-18V and a maximum output current of 400mA. Pololu 2121
zł39.29
24h
Available quantity: 1
Available
No product available!
The Step-Up / Step-Down S18V20F12 inverter module gives the output voltage of 12V with a wide input voltage range of 3 ... 30V and a maximum output current of 2A. Polol 2577
zł137.49
4 weeks
No product available!
This powerful step-up/step-down regulator efficiently produces an adjustable 4 V to 12 V output from input voltages between 3 V and 30 V while allowing a typical output current of up to 2 A when the input voltage is close to the output voltage and offering typical efficiencies of 80% to 90%.
zł131.39
4 weeks
No product available!
The S9V11F5 switching step-up/step-down regulator efficiently produces 5V from input voltages between 2V and 16V. Pololu 2836
zł24.99
24h
Available quantity: 1
Available
Module with LM2596 step-down converter and LM2577 step-up converter. The inverter has a battery and battery indicator with constant current
zł31.48
24h
Available quantity: 5
Available
The S9V11MACMA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has a precision-adjustable low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge.
zł54.70
24h
Available quantity: 2
Available
The S9V11F5S6CMA switching step-up/step-down regulator efficiently produces a fixed 5 V (default) or 6 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.)
zł42.90
24h
Available quantity: 4
Available
The S9V11F3S5 switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.)
zł21.37
24h
Available quantity: 5
Available
Pololu 2871 - 3.3V Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11F3S5CMA
The S9V11F3S5CMA switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.)
zł42.53
4 weeks
No product available!
The S9V11F3S5C3 switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has fixed 3.3 V low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge.
zł25.77
24h
Available quantity: 6
Available
Step-Up/Step-Down converter with an output voltage of 3.3 V, an input voltage of 2.5 to 15 V and a maximum current of 600 mA. DFRobot DFR0568
zł16.43
4 weeks
No product available!
Step-Up converter with adjustable output voltage from 5 to 40 V, input voltage from 3 to 35 V and a maximum current of 5 A
zł8.51
24h
Available quantity: 4
Available
Step-Up/Step-Down converter with an output voltage of 3.3 V, an input voltage from 1.8 to 5 V and a maximum current of up to 100 mA
zł4.00
24h
Available quantity: 56
Available
Step-Up/Step-Down converter with adjustable output voltage from 0.8 to 33 V, input voltage from 4.5 to 30 V and a maximum current of 5 A. It is equipped with a voltmeter with a display
zł44.16
24h
Available quantity: 4
Available
Isolated DC-DC power module designed for safe powering of sensitive electronic circuits, offering galvanic isolation up to 3kVRMS, 5V or 5.5V output voltage, and output current up to 300mA. Pololu 5414