- Obecnie brak na stanie

Infra Red Thermometer, TO-39, Melexis, RoHS
MLX90614ESF-DCH
Infra Red Thermometer, TO-39, Melexis, RoHS
The MLX90614 is an Infra Red thermometer for non contact temperature measurements. Both the IR sensitive thermopile detector chip and the signal conditioning ASSP are integrated in the same TO-39 can.
Thanks to its low noise amplifier, 17-bit ADC and powerful DSP unit, a high accuracy and resolution of the thermometer is achieved.
The thermometer comes factory calibrated with a digital PWM and SMBus (System Management Bus) output.
As a standard, the 10-bit PWM is configured to continuously transmit the measured temperature in range of -20…120°C, with an output resolution of 0.14°C
Features:
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Moduł z czujnikiem prądu i napięcia. Może mierzyć napięcie do 26 V i prąd do 3,2 A. Oparty na czujniku INA219, komunikacja I2C. SparkFun SEN-15176
Brak towaru
Płytka rozszerzeniowa z modułem NFC do Raspberry Pi oparta na układzie NXP PN512. Ma zintegrowaną wydajną antenę i jest wyposażona w interfejs SPI. Moduł spełnia wymogi zgodności ze standardami trybu czytnika, trybu P2P i emulacji karty oraz jest całkowicie obsługiwany przez NXP NFC Reader Library. EXPLORE-NFC
Brak towaru
EMW3162 WIFI Shield składa się z płytki bazowej oraz modułu WiFi EMW3162. Współpracuje z Arduino i STM32 Nucleo. Wbudowany konwerter USB - UART
Brak towaru
Brak towaru
RGB LED Satellite Module 004 (Circle)
Brak towaru
2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Right Angle Extended
Brak towaru
Brak towaru
Wyświetlacz jest kompatybilny z Odroidem U3 (montowany na płytce Odroida U3), ale można go także podłączyć do Odroida XU+E lub X2 za pomocą kabla USB.
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Infra Red Thermometer, TO-39, Melexis, RoHS