Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1°C and a viewing angle of 55° x35°. Communication with the sensor takes place via the I2C interface. Pimoroni PIM365

This development board for building robots and mechatronics projects features 2.4 GHz Wi-Fi and Bluetooth 5.2 connectivity. Based on the RP2350 microcontroller (Dual Arm Cortex-M33 up to 150 MHz, 520 KB SRAM, 4 MB QSPI Flash), it allows you to control two DC motors via a DRV8833C H-bridge and support up to six servos. It features 12 addressable RGB (Neopixel) LEDs, ADC inputs, numerous GPIOs, and two Qw/ST headers for connecting sensors. Pimoroni PIM733

This compact module adds 2.4 GHz WiFi and Bluetooth connectivity to Pimoroni Yukon projects. It\'s based on the proven Raspberry Pi RM2 (CYW43439) chip, ensuring stable communication with the internet, APIs, and other IoT devices. The module is fully assembled and requires no soldering, allowing you to get started quickly after installation in the appropriate Yukon slot. MicroPython support simplifies the development of network applications, remote control, and automation projects. Pimoroni PIM731

A module with a set of environmental sensors (pressure, temperature and humidity sensor, light sensor, MEMS microphone) designed for micro:bit. Pimoroni PIM355

Audio module with loudspeaker designed to work with micro:bit. There is an amplifier and an 8 Ω 2 W speaker on the board. Pimoroni PIM356

This power supply module for the Pimoroni Yukon offers an adjustable output voltage from 3 to 12V using a powerful step-down converter. It provides stable power with a continuous current of 5A and a peak current of up to 10A, as well as the ability to set a fixed 5V output by cutting a dedicated trace. The module allows for the use of additional digital signals and monitoring of voltage, temperature, and power supply status. Pimoroni PIM690

A power module for the Pimoroni Yukon platform that allows independent control of two high-current outputs within a voltage range of 5 to 17 V. Built-in diodes and chokes enable excellent handling of inductive loads such as pumps, fans, and solenoids. Each channel can also operate in PWM mode, allowing for smooth power regulation in slow-response devices. The module supports a total current of up to 15 A and includes temperature sensors and a "power good" signal. Pimoroni PIM692

This module controls addressable LED strips in the Pimoroni Yukon system, featuring a stable 5V/5A output and a voltage level converter for proper communication with RGB LEDs. It allows for easy connection of strips via screw terminals and works with popular standards such as WS2812, SK6812, APA102, and Dotstar. The module can even control two WS2812 strips simultaneously, offering high performance and flexibility. Pimoroni PIM694

A programmable desktop display based on the RP2350 microcontroller, featuring a 4-inch IPS touchscreen display with a resolution of 480 x 480 pixels. Built-in WiFi and Bluetooth allow it to download data from the internet and interact with other devices, serving as a calendar, weather station, or data panel. The device features RGB backlighting, a piezo speaker, a microSD card reader, and battery power for increased flexibility. Pimoroni PIM765

A set of two black plastic brackets for mounting micro motors. The set includes mounting screws and nuts. Pimoroni COM0817

This module for the Pimoroni Yukon system allows for simultaneous control of four servos. It features a stabilized power supply with adjustable voltage of 5V, 6V, or 7.4V and a TPS54A24 step-down converter, supporting up to 5A continuous and 10A peak current. The module has built-in temperature sensors and a power status signal for increased safety. Pimoroni PIM696

Module with BME688 chip, microphone and LTR-559 light intensity. Equipped with a display, it is dedicated to the Raspberry Pi Pico/Pico W. Pimoroni PIM635

This module supports four servos with direct power supply ranging from 5-17V, allowing for the construction of high-power designs. The module features standard servo connectors and two analog inputs that can be used to interface with sensors or servos with feedback. Pimoroni PIM695

This compact module allows for convenient control of servos communicating via UART in half-duplex or full-duplex mode, making it suitable for a variety of robotic projects. Equipped with Molex connectors and additional pins, it allows for easy integration of popular servos, such as the LX-16A, as well as models from other manufacturers. The module offers high-current power output, ensuring stable operation of complex systems with multiple servos. Pimoroni PIM697

Module with LCD 2.4" display with a resolution of 320x240 px and RP2040 microcontroller. Equipped with QW/ST connector. Pimoroni PIM624

Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM638

Module with BME280 sensor, microphone and PMSA003I air quality sensor equipped with Raspberry Pi Pico W. Pimoroni PIM629

ACeP e-Paper 7-color display module with 4" diagonal and 640x400 px resolution equipped with Raspberry Pi Pico W. Pimoroni PIM654

Compact 4G LTE HAT for Raspberry Pi, ideal for remote IoT projects operating without Wi-Fi. Includes SIMCom A7683E modem, SIM connector, SMA antenna, user buttons and Qw/ST port for easy expansion. No soldering required and great for mobile or field installations. Pimoroni PIM717

LED driver with built-in RM2 module, offering Wi-Fi, Bluetooth and power supply up to 3A via USB-C. Supports remote lighting control, integration with automation systems and extensions via Qw/ST connector. Ready to use out of the box, ideal for decoration, light installations and artistic projects. Pimoroni PIM729