Flexible LED white 130mm

LED strip with addressable RGB WS2813 diodes on a white PCB. It is powered by 5 V DC, has a length of 1 m and 60 LEDs/m. Protection degree IP67

FLUX LED 7.62 x 7.62 [mm] 3mm WARM white 3600K, angle 80 degrees; light intensity 2500 mcd (20mA) (3.2V) 4.5 [lm]

The LS Q976-NR-1 is a red SMD LED with a wavelength of 633 nm and a brightness of 180 mcd at 20 mA current. Thanks to its compact 0603 package (1.6 mm x 0.8 mm x 0.8 mm), it is ideal for space-saving applications such as display backlighting or signaling in electronic devices. The LED features a viewing angle of 160° and a typical forward voltage of 2 V, making it an efficient and versatile component for electronic projects.

A 10 mm diameter indicator lamp is supplied with 12 V DC. Green color. XD10-3

Matrix with 16 WS2812B RGB diodes controlled by a serial signal. The module can be powered with 5V, only one signal line is required for control

The Led 16x16 WS2812 matrix is made of flexible material on which RGB LEDs are arranged in the form of 16 rows and 16 columns, one microcontroller pin is enough to operate them. Each pixel can emit color from a 24-bit palette.

Module with a 5 mW laser diode displaying a point. It uses a digital signal for control. It can be powered with the voltage of 5 V

Rectangular LED diode 5x2 mm BLUE milk diffused, angle 160 degrees; light intensity 90 mcd (20mA) (3.3V); df 470nm

COB LED ring, made of aluminum PCB, emits cold white light (2800-3000k) at 12 V DC with a maximum current consumption of 300 mA, offering a wide beam angle of 120 °

Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM527

Flashlight module using a bright 5000 mCd white LED. Power is supplied by a 12 V N-type battery, which is included in the set. The flashlight is equipped with a slide switch for convenient switching on and off. Kitronik 2114

Cold White LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21

Module with LED strip designed for the MyoWare 2.0 muscle tension sensor. Equipped with a LiPo battery, it allows you to build portable devices. SparkFun DEV-18387

LED strip with addressable RGB WS2815 diodes on a white PCB. It is powered by 12 V DC, has a length of 5 m and 30 LEDs/m. Protection level IP67

Tape with RGB LEDs WS2812B 1m long, 144 LEDs per meter, the diodes are mounted on a flexible white PCB. The diodes are not protected against water.

RGB Panel Shield is an extension in the form of shield overlays designed for Arduino. With its help it is possible to control the RGB 32x32 LED display (refresh 1: 8). Communication with the display takes place via a 2x8 connector. SparkFun SPX-14721