zł45.02
Bambu Lab Desiccant for AMS(6 pack)
ID: 1192586
zł25.56
Tax included
zł20.78 tax excl.
Bambu Lab moisture absorber, containing calcium chloride, provides effective protection of the filaments against moisture, guaranteeing the highest quality of 3D prints by eliminating problems related to air bubbles. Bambu Lab Desiccant for AMS
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The Bambu Lab moisture absorber was designed for use in the intelligent Bambu Lab AMS automatic filament feeding and switching system. The product contains six bags of calcium chloride with hygroscopic properties, able to effectively absorb moisture from the environment. Each bag has dimensions of 100x45x17 mm and weighs 20 g. The use of Bambu Lab moisture absorbers guarantees the highest quality of filaments and protects 3D prints against losses caused by air bubbles.
In the AMS system, the Bambu Lab moisture absorber is located next to the filament support rollers. There are two dehumidifier chambers secured with a plastic mesh. To replace the desiccant, open each compartment, remove the used desiccant and replace it with a new bag. After replacement, it is important to close the AMS to prevent moisture from being absorbed from the outside.
The new absorbent bag contains white calcium chloride in loose form. As moisture is absorbed, this substance turns into a yellow paste. When the calcium chloride has completely turned into a yellow paste, it has absorbed the maximum amount of moisture and needs to be replaced. If the absorber is worn out, it is recommended to dry the filament spools before replacing them with new packaging.
1192586
Other products in the same category (16)
Self-adhesive kapton tape with a width of 200mm, made of polyimide, protects electronic components from high temperatures. It is also used during 3D printing
zł144.71
24h
Available quantity: 11
Available
Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table. Set of 4 pcs
zł5.76
24h
Available quantity: 8
Available
A needle with a diameter of 0.35 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle
zł1.17
6 weeks
No product available!
Feeler gauge consisting of 17 blades with a thickness of 0.02 to 1 mm. It will work, among others for leveling the table in a 3D printer. Yato YT-7220
zł8.71
24h
Available quantity: 11
Available
A set of M2 and M2.5 threaded brass inserts in lengths from 2 to 10 mm. The set includes 12 types of inserts, 20 pieces each.
zł49.51
24h
Available quantity: 5
Available
Silicone cover for the heating block of a Volcano type 3D printer. Provides an increase in nozzle temperature stability, especially when cooling by air flow
zł4.70
24h
Available quantity: 79
Available
Wipes soaked in isopropyl alcohol. They perfectly remove all impurities from optical elements and electronic devices. 25 pcs. AG Termopasty ART.AGT-181
zł30.90
24h
Available quantity: 11
Available
Silicone cover for the heating block of a MK10 type 3D printer. Provides an increase in nozzle temperature stability, especially when cooling by air flow
zł3.74
24h
Available quantity: 93
Available
Magnetic sheet with adhesive is a practical and universal solution for attaching various objects to magnetic surfaces
zł69.90
24h
Available quantity: 6
Available
A needle with a diameter of 1 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle
zł5.40
24h
Available quantity: 18
Available
Deburring tool with a replaceable HSS blade and a rotating blade with a pocket hook, intended for processing copper, steel, aluminum, brass, cast iron and plastic pipes, for removing sharp burrs and preparing pipes for installation, as well as for processing flat surfaces and sheets of various materials. Yato YT-22360
zł22.28
24h
Available quantity: 5
Available
Solvent HIPS is a preparation for dissolving HIPS filament support structures used in 3D printing, used in metal containers or ultrasonic baths, with a dissolving time from 1 to 24 hours, which does not require heating. MCP ART.051
zł69.90
24h
Available quantity: 9
Available
A needle with a diameter of 0.5 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle
zł4.39
6 weeks
No product available!
Set of M3 brass thread inserts in lengths from 3 to 12 mm. The set includes 7 types of inserts, 20 pieces each.
zł39.70
24h
Available quantity: 2
Available
Holder for attaching the glass to the 3D printer table. It uses a screw with a knurled grip
zł14.06
24h
Available quantity: 9
Available
Self-adhesive capton tape with a width of 20mm, made of polyimide, protects electronic components from high temperatures. It is also used during 3D printing
zł20.02
24h
Available quantity: 9
Available
Bambu Lab moisture absorber, containing calcium chloride, provides effective protection of the filaments against moisture, guaranteeing the highest quality of 3D prints by eliminating problems related to air bubbles. Bambu Lab Desiccant for AMS