RTC DS1307 module with clock dedicated to matrix displays with HUB75 interface. Designed for minicomputers Raspberry Pi. Adafruit 2345

Adapter with built-in Power Delivery (PD) trigger. It has a USB type C socket and a 3.5x1.35 mm DC plug

Module with FM receiver, with its help it is possible to receive radio waves broadcast in the FM band (frequency 50-115MHz). The module has been equipped with a 3,5mm jack socket, through which you can connect headphones. The module has a connector in accordance with the Grove standard. Seeed Studio 107020006

Adapter form IDC10 1,27 mm used on laser dust sensor PMS7003 to 2,54 mm goldpin. It helps with connecting sensor to standard breadboard or development boards (Arduino, STM32 etc.). It can be connected to PMS7003 easily, as connector fit with sensor\'s outputs

Module with a DS18B20 temperature sensor with a measuring range from -55 to 125°C. It communicates via the 1-wire interface

The high power motor driver module works on the basis of Infineon BTS7960B systems. Maximum controller current: 43 A, operating voltage range: 5.5V - 27V. The module has a heat sink and can be controlled from the Arduino, Raspberry Pi, and STM levels. IBT_2

The module with a black and white OLED display, 0.96" diagonal and 128x64 pixels resolution. Equipped with an XH2.54 connector, communicates via the I2C interface

32-bit microcontroller from the STM32F7 family with ARM Cortex-M7 core, 2MB Flash memory, 216MHz clock speed, DSP with FPU, Art accelerator, SDRAM, TFT, JPEG codec, DFSDM, 144LQFP, STM, RoHS

Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface

Artix-7 FPGA, 33280 Logic Cells, 5200 Slices, 90 DSP Slices, CSPBGA325, Xilinx

Module with a potentiometer with a rotation range of 270 ° with an analog output. Compatible with 3.3 V and 5 V

Module with a dust sensor PPD42NS. The board is equipped with a Grove cable and communicates via the PWM interface. Seeed Studio 101020012

Hall sensor module. It has a digital output on the XH2.54 connector

Adapter with built-in Power Delivery (PD) trigger. It has a USB type C socket and a 4.0x1.35 mm DC plug. Maximum power up to 100 W

A small module with a PIR motion sensor. It allows detecting movement within a maximum range of 6 meters (default up to 3 meters). The measuring angle is 120 degrees. The module has a connector in accordance with the Grove standard. Seeed Studio 101020020

Module with a magnetic sensor based on the CT10 reed switch. CT10 is a unipolar reed switch, normally open. The sensor reacts to the action of an electromagnet, permanent magnet or a combination thereof. The module has a connector in accordance with the Grove standard. Seeedstudio 101020038

Module with RGB LED, it is possible to control individual colors using digital signals as well as PWM signals. The module has a connector in accordance with the Grove standard. Seeed studio 101020472

Module with barcode and QR scanner. It allows you to read one-dimensional and two-dimensional codes using the intelligent image recognition algorithm. It has a built-in USB and UART interface. GM73

Adapter with built-in Power Delivery (PD) trigger. It has a USB type C socket and a 4.5x3.0 mm DC plug. Maximum power up to 100 W

Adapter with built-in Power Delivery (PD) trigger. It has a USB type C socket and a 5.5x2.5 mm DC plug. Maximum power up to 100 W