![TDA7498E 2x160W 15-36V audio amplifier](https://kamami.pl/65957-large_default/tda7498e-2x160w-15-36v-audio-amplifier.jpg)
![TDA7498E 2x160W 15-36V audio amplifier](https://kamami.pl/65957-large_default/tda7498e-2x160w-15-36v-audio-amplifier.jpg)
zł110.30 tax excl.
Class D digital audio amplifier. It has two channels with a power of 160 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 15 to 36 V.
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Class D digital audio amplifier based on the TDA7498E chip. It has two channels with a power of 160 W (left and right), it can also work as a mono amplifier (BTL bridge configuration) with a power of 220 W. User can connect speakers with impedance from 4 to 8 Ω. The module is supplied with the voltage from 15 to 36 V through the screw connection. It is equipped with an audio input on a 2.54 mm and RCA connector and a speaker output on a screw connector. The user has a potentiometer to adjust the volume level. It can be used as an element of a home audio system.
Module with an AB class amplifier based on the Boomer® LM4853 system. It can work in two modes: mono (power 1.5 W, load 4 Ω) or stereo (power 300 mW, load 8 Ω). It has a potentiometer for power control and gain control for the left and right channel. SparkFun DEV-14475
Stereo audio amplifier with a power of 40 W (2 x 20 W) powered with the voltage of 12 V. Equipped with an audio input in the form of two chinch sockets and an audio jack 3.5 mm input
No product available!
Stereo audio preamplifier based on the LM1036N chip. It allows you to control the bass, treble and volume level
No product available!
Audio amplifier with three output channels. It can be powered with the voltage from 5 to 26 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass). Equipped with Bluetooth 5.0 communication. XY-S100L
No product available!
Microphone preamplifier based on the NE5532 chip. Powered with DC voltage from 9 V to 24 V or AC in the range from 8 V to 16 V
Audio module with DAC, stereo amplifier and display, designed to work with the Raspberry Pi. Pimoroni PIM484
PAM8302 Class D mono digital audio amplifier module. The system allows you to connect one loudspeaker with an impedance of 4 to 8 Ω and a power of 2.5 W. The board is equipped with a STEMMA connector. Adafruit 5647
Class AB audio amplifier with three output channels. It can be powered with AC voltage from 8 to 18 V and has two outputs with a power of 18 W (left and right) and one with a power of 20 W (bass)
Module with the PAM8904 controller designed specifically to control piezoelectric elements. The amplifier operates over a wide frequency range, up to 300 kHz, and allows for gain up to approximately 13 Vpp. Adafruit 5791
Class D stereo sound amplifier based on the Texas Instruments TPA2016D2 circuit. It can work with 4 Ω speakers with power up to 2.8 W or 8 Ω with power up to 1.7 W in stereo mode. SparkFun DEV-20690
Audio module with DAC and mono amplifier designed to work with TinyPICO and TinyS2. Pimoroni SHIELD-AUDIO-I2S
No product available!
Single-channel audio amplifier up to 100 W.
The PAM8403 class D stereo digital audio amplifier module is equipped with Bluetooth communication. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 3 W
The module with a digital stereo audio amplifier is equipped with Bluetooth communication. The system allows you to connect two speakers with an impedance from 4 Ω to 8 Ω and a power of 15 W per channel
LM386 audio amplifier module in a set with a loudspeaker. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 101020853
Digital mono audio amplifier based on the HXJ8002 chip. It has one channel with a power of 3 W and can work with speakers from 2 to 8 Ω. It is powered with the voltage from 2 V to 5.5 V
A sound card in the form of a small device with a USB plug, designed to work with the Raspberry Pi and NVIDIA Jetson Nano minicomputer. Waveshare USB TO AUDIO
Stereo audio amplifier with Bluetooth 5.0 communication. It can be powered with the voltage from 5 to 24 V and has two outputs with a power of 100 W. ZK-1002L
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 16 Ω. It is powered with the voltage ranging from 9 to 24 V.
A set with an audio amplifier with a power of 350 W dedicated to the bass column (subwoofer)
Class D digital audio amplifier. It has two channels with a power of 160 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 15 to 36 V.