Category: Oscilloscopes and accessories
Subcategories
There are 130 products.
A 3-in-1 device that combines a digital oscilloscope with an LCR tester and a DDS generator. It allows oscilloscope measurements and testing of electronic components, including diodes and transistors, as well as generation of digital signals. Fnirsi DSO-TC3 Standard
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 60 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-80
Universal oscilloscope probe with BNC plug with 100: 1 voltage divider and 100 MHz bandwidth. It allows you to perform measurements with a maximum voltage of 2 kV
A set of needle probes used for piercing wire insulation. They can be used as pin probes when working with small PCBs or connectors. Hantek HT307
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-150
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 200 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-200
Pocket-sized digital oscilloscope in assembled form. Based on an ARM Cortex-M3 core microcontroller, it is equipped with a 320x240 pixel colour display. Fnirsi DSO138
A 2-in-1 device that combines a digital oscilloscope with an LCR tester. It allows oscilloscope measurements and testing of electronic components, including diodes and transistors. Fnirsi DSO-TC2
Universal oscilloscope probe with BNC connector and 10:1 voltage divider. It has a frequency response of 80 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-90
A 2-in-1 device that combines a digital oscilloscope with an LCR tester. It allows oscilloscope measurements and testing of electronic components, including diodes and transistors. Fnirsi DSO-TC2 Standard
Portable digital oscilloscope with one measurement channel. It offers a frequency bandwidth of 110 MHz and at a sampling rate of 500 MS/s. Fnirsi 1C15
Oscilloscope probe designed for the analysis of signals generated by the ignition coil in automotive engines. It is compatible with most digital oscilloscopes. Hantek HT25
A 2-channel digital oscilloscope that connects to a computer via a USB interface. It offers a frequency bandwidth of 20 MHz and sampling up to 48 MS/s. Hantek 6022BE
Cable (adapter) of a BNC connector to banana plugs. Allows convenient connection of the device to an oscilloscope, for example. Hantek HT30A
BNC connector cable (adapter) for minigrabber clips. It enables the connection of the tested system with an oscilloscope
Cable (adapter) of a BNC connector to banana plugs. Allows convenient connection of a device to an oscilloscope, for example. BNC Q9
Pocket-sized digital oscilloscope powered by a rechargeable battery. Based on an ARM Cortex-M3 core microcontroller, it is equipped with a 320x240 pixel colour display. Fnirsi 138 Pro
Digital oscilloscope. It has two measurement channels with 150 MHz bandwidth. Hantek DSO2C15
Portable digital oscilloscope with built-in multimeter. It has two measurement channels with a bandwidth of 40 MHz and a sampling rate of 250 MSa/s. Hantek 2C42
Pocket-sized digital oscilloscope with 8MB memory. Based on a microcontroller with an ARM Cortex-M3 core, it is equipped with a 320x240 pixel color display and signal generation function. MiniWare DS211