

zł743.09 tax excl.
Pocket-sized digital oscilloscope with 8MB memory. Based on a microcontroller with an ARM Cortex-M3 core, it is equipped with a 320x240 pixel color display and signal generation function. MiniWare DS213
Pocket handheld digital oscilloscope. Based on a microcontroller with an ARM Cortex-M3 core, it is equipped with a 320x240 pixel color display, USB port and charging function. It has pre-loaded firmware and a built-in 8 MB mass memory chip where recorded waveforms can be saved. It allows you to measure basic parameters, including voltage, current, frequency, period, rise and fall times, amplitude and resistance. It has the ability to generate basic square, triangular, sine or sawtooth signals. It is compact, easy to use and meets the basic requirements of the laboratory, repair of electrical equipment and electrical engineering.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Portable 65 Watt flask soldering iron. It has an adjustable operating temperature from 50°C to 400°C. It can be powered by a power supply with a DC or USB type C connector. The soldering iron and B2 soldering tip are included. MiniWare TS101 (B2)
A mini heating board (heating station) dedicated to preheating PCBs for soldering or desoldering electronic components. The MHP30 converts a large heating station to pocket size and, thanks to the popular PD power input, enables the heating station to become a portable tool. MiniWare MHP30
A programmable linear DC power supply based on a modular design. It has one output channel with up to 30 V and up to 10 A of current. MiniWare MDP-P906
A compact 3-in-1 device that combines an oscilloscope, signal generator and digital multimeter, offering a wide range of measurement capabilities in one tool. With a 10MHz bandwidth, 48MSa/s sampling and 13 waveform generation function, it is perfect for analyzing and testing electronic systems. The color display, built-in 3000mAh battery and handy housing make it a practical solution both in the workshop and in the field. Fnirsi DST-210
No product available!
An advanced 4-in-1 tablet oscilloscope combining the functions of a digital oscilloscope, signal generator, spectrum analyzer, and frequency response analyzer. It offers a 350MHz bandwidth, 1GSPS sampling rate, a 7" IPS touchscreen, and the ability to store 500 waveforms and 90 screenshots, making it a comprehensive tool for engineers and service technicians. With multi-language support, a compact design, extensive measurement functions, and firmware updates, the DPOS350P delivers professional precision and portability in a single device. Fnirsi DPOS350P
Portable digital oscilloscope with built-in signal generator and multimeter. It has two measurement channels with a 120 MHz bandwidth and a single-channel signal generator. DSO3D12
Digital oscilloscope with compact dimensions. It offers a frequency bandwidth of 18 MHz and a sampling rate of 40 MS/s. It features a 2.4" colour display with a resolution of 320x240 pixels. It has a built-in rechargeable battery and an oscilloscope probe included. ZEEWEI DSO154PRO
Pocket-sized digital oscilloscope with 8MB memory. Based on a microcontroller with an ARM Cortex-M3 core, it is equipped with a 320x240 pixel color display and signal generation function. MiniWare DS211
Compact oscilloscope with 2.8” HD screen, 10 MHz bandwidth and 48 MSa/s sampling, ideal for diagnostics and education. It offers AUTO mode, various trigger modes and a signal generator function up to 50 kHz. Built-in 1000 mAh battery provides up to 4 hours of mobile operation. Fnirsi DSO510
Tooltop ET120M is a 120 MHz, 500 MS/s digital oscilloscope ideal for precise analysis of electrical signals. Equipped with a 7-inch color display and two measurement channels, it offers convenient operation and accurate analysis in a compact, portable form.
Fnirsi DSO153 is a portable oscilloscope with high functionality, ideal for hobbyists in electronics. With its compact design, high-resolution display, and long battery life, this device is perfect for use in the field and in the workshop. The built-in signal generator and easy operation with a single AUTO button further enhance its versatility. Fnirsi DSO153
A 2-in-1 device that combines a two-channel digital oscilloscope with a DDS generator. It allows oscilloscope measurements with a bandwidth of up to 180 MHz and the generation of digital signals up to 20 MHz. Fnirsi DPOX180H
Portable digital oscilloscope with one measurement channel. It offers a frequency bandwidth of 5 MHz and at a sampling rate of 20 MS/s. Fnirsi DSO-Pro5MHz
Compact digital oscilloscope with built-in DDS signal generator, offering 50 MHz bandwidth and 250 MSa/s sampling. It has two measurement channels, 3.5" IPS display and the function of generating 13 types of waveforms up to 50 kHz. Thanks to the 1500 mAh battery, it will be useful in mobile work, service and education. Fnirsi DS215H Standard
A 3-in-1 device that combines a digital oscilloscope with an LCR tester and a DDS generator. It allows oscilloscope measurements and testing of electronic components, including diodes and transistors, as well as generation of digital signals. Fnirsi DSO-TC3
Fnirsi DSO153 is a portable oscilloscope with high functionality, ideal for hobbyists in electronics. With its compact design, high-resolution display, and long battery life, this device is perfect for use in the field and in the workshop. The built-in signal generator and easy operation with a single AUTO button further enhance its versatility. Fnirsi DSO153
Digital oscilloscope with compact dimensions. It offers a frequency bandwidth of 200 kHz and a sampling rate of 2.5 MS/s. Equipped with a 2.8" colour display with a resolution of 320x240 pixels. Fnirsi DSO152
A 2-in-1 device that combines a digital oscilloscope with an LCR tester. It allows oscilloscope measurements and testing of electronic components, including diodes and transistors. Fnirsi DSO-TC2
A 3-in-1 device that combines a digital oscilloscope with an LCR tester and a DDS generator. It allows oscilloscope measurements and testing of electronic components, including diodes and transistors, as well as generation of digital signals. Fnirsi DSO-TC3 Standard
Pocket-sized digital oscilloscope with 8MB memory. Based on a microcontroller with an ARM Cortex-M3 core, it is equipped with a 320x240 pixel color display and signal generation function. MiniWare DS213