Fnirsi 2C23T - 2-channel 10MHz portable oscilloscope with signal generator and multimeter
ID: 1188445
5906623434909
zł259.00
Tax included
zł210.57 tax excl.
Portable digital oscilloscope with built-in signal generator and multimeter. It has two measurement channels with a bandwidth of 10 MHz and a single-channel signal generator with a frequency of up to 2 MHz. Fnirsi 2C23T
Description
Portable digital oscilloscope with built-in signal generator and multimeter. It is equipped with an LCD display with a diagonal of 2.8" and a resolution of 320x240 pixels with the ability to adjust the contrast. It has two measurement channels and is characterized by good operating parameters, including a bandwidth of 10 MHz, a sampling rate of 50 MSa/s and a 32 kB memory buffer. Additionally The oscilloscope offers a single-channel signal generator with a frequency of up to 2 MHz, which can generate sine wave, square wave, triangle signal and noise. It also allows the device to be used as a multimeter to measure AC and DC voltage, AC and DC current, resistance, capacitance and temperature. It is powered by a built-in battery and charged via a USB Type-C connector. It is a useful measurement tool widely used in various fields such as communications, aviation, embedded systems, computers, research and education.
Features
Oscilloscope
- Number of channels: 2
- Frequency band: 10MHz
- Sampling rate: 50 MSa/s
- Triggering:
- Type: for slope
- Mode: auto, normal, single
- Slope: rising, falling
- CH1/CH2 source
- DC, AC or GND coupling
- Impedance: 1 MΩ
- Time base: 50 ns to 10 s
- Vertical sensitivity: 20 mV/div to 10V/div (X1)
- Maximum voltage: 400V
Generator
- Number of channels: 1
- Maximum frequency: 1 Hz to 2 MHz
- Standard waveforms: sine wave, square wave, triangle signal, noise, DC output
Multimeter
- DC voltage: 10V, 100V, 1000V ± (0.5% + 3)
- AC voltage: 10V, 100V, 750V ± (1% + 3)
- Constant current: 1000uA, 100mA, 1000mA, 10A ± (1.2% + 3)
- AC current: 1000uA, 100mA, 1000mA, 10A ± (1.5% + 3)
- Resistance: 1000Ω, 10kΩ, 100kΩ, 1000kΩ, 10MΩ ± (0.5%±3), 100MΩ ± (1.5%±3)
- Capacitance: 10nF, 100nF, 1uF, 10uF, 100uF ±(2% + 5)
- Temperature: -55°C to 1300°C ±(2.5% + 5)
- Diode test: 0V to 1V
- Circuit continuity test
General parameters
- TFT color LCD display with a diagonal of 2.8" and a resolution of 320 x 240 pixels
- Power supply: 3000 mAh battery
- USB Type-C charging
- Dimensions 167 x 89 x 35 mm
- Weight: 300g
Kit contains
- Oscilloscope
- Test leads
- Probe
- USB cable
- Cables for a multimeter
1188445
Data sheet
- Type of oscilloscope
- Portable
- Bandwidth
- 10 MHz
- Sampling rate
- 50 Ms/s
- Memory depth
- 32 Kpts
- Number of channels
- 2
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Universal oscilloscope probe with BNC plug with 100: 1 voltage divider and 100 MHz bandwidth. It allows you to perform measurements with a maximum voltage of 2 kV
zł71.44
24h
Available quantity: 4
Available
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 60 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-80
zł24.46
Delivery date unknown
No product available!
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-150
zł30.58
Delivery date unknown
No product available!
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 200 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-200
zł73.82
24h
Available quantity: 28
Available
Universal oscilloscope probe with BNC connector and 10:1 voltage divider. It has a frequency response of 80 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-90
zł40.00
24h
Available quantity: 19
Available
Other products in the same category (16)
A 3-in-1 device that combines a digital oscilloscope with an LCR tester and a DDS generator. It allows oscilloscope measurements and testing of electronic components, including diodes and transistors, as well as generation of digital signals. Fnirsi DSO-TC3
Regular pricezł270.54zł189.00
24h
Available quantity: 18
Available
Fnirsi 2C53T High Profile - 2-channel 50MHz oscilloscope with multimeter and generator + accessories
A compact 3-in-1 device combining an oscilloscope, multimeter, and signal generator, designed for electronics professionals and enthusiasts. Equipped with two 50 MHz channels, a 250 MS/s sampling rate, and a built-in 4.5-digit multimeter, it provides precise measurements of signals and electrical parameters. With a color HD screen, long-lasting battery, and data logging capabilities, it\'s the ideal tool for laboratory, service, and field work. Fnirsi 2C53T High Profile
zł366.86
6 weeks
No product available!
Pocket-sized digital oscilloscope powered by a rechargeable battery. Based on an ARM Cortex-M3 core microcontroller, it is equipped with a 320x240 pixel colour display. Fnirsi 138 Pro
zł131.52
24h
Available quantity: 8
Available
Pocket-sized digital oscilloscope with 8MB memory. Based on a microcontroller with an ARM core, it is equipped with a 320x240 pixel color display. MiniWare DS212
zł499.00
24h
Available quantity: 10
Available
A 3-in-1 device that combines a digital oscilloscope with an LCR tester and a DDS generator. It allows oscilloscope measurements and testing of electronic components, including diodes and transistors, as well as generation of digital signals. Fnirsi DSO-TC3 Standard
Regular pricezł230.93zł179.00
24h
Available quantity: 25
Available
Pocket-sized digital oscilloscope with 8MB memory. Based on a microcontroller with an ARM Cortex-M3 core, it is equipped with a 320x240 pixel color display and signal generation function. MiniWare DS211
zł319.01
24h
Available quantity: 10
Available
An advanced 4-in-1 tablet oscilloscope combining the functions of a digital oscilloscope, signal generator, spectrum analyzer, and frequency response analyzer. It offers a 350MHz bandwidth, 1GSPS sampling rate, a 7" IPS touchscreen, and the ability to store 500 waveforms and 90 screenshots, making it a comprehensive tool for engineers and service technicians. With multi-language support, a compact design, extensive measurement functions, and firmware updates, the DPOS350P delivers professional precision and portability in a single device. Fnirsi DPOS350P
zł1,149.84
6 weeks
No product available!
Pocket-sized digital oscilloscope in assembled form. Based on an ARM Cortex-M3 core microcontroller, it is equipped with a 320x240 pixel colour display. Fnirsi DSO138
zł99.90
24h
Available quantity: 14
Available
Compact digital oscilloscope with built-in DDS signal generator, offering 50 MHz bandwidth and 250 MSa/s sampling. It has two measurement channels, 3.5" IPS display and the function of generating 13 types of waveforms up to 50 kHz. Thanks to the 1500 mAh battery, it will be useful in mobile work, service and education. Fnirsi DS215H Standard
zł329.00
24h
Available quantity: 5
Available
Portable digital oscilloscope with built-in signal generator and multimeter. It has two measurement channels with a bandwidth of 10 MHz and a single-channel signal generator with a frequency of up to 2 MHz. Fnirsi 2C23T High profile
zł294.07
24h
Available quantity: 1
Available
Pocket-sized digital oscilloscope with 8MB memory. Based on a microcontroller with an ARM Cortex-M3 core, it is equipped with a 320x240 pixel color display and signal generation function. MiniWare DS213
zł914.00
24h
Available quantity: 10
Available
A 2-in-1 device that combines a digital oscilloscope with an LCR tester. It allows oscilloscope measurements and testing of electronic components, including diodes and transistors. Fnirsi DSO-TC2
Regular pricezł234.91zł187.92
24h
Available quantity: 6
Available
Compact 3 in 1 digital oscilloscope that combines the functions of an oscilloscope, electronic component tester and signal generator. The device offers a 10MHz bandwidth, 48MSa/s sampling and automatic recognition of components such as transistors, diodes and thyristors. With a 2.8" color screen, 1500mAh battery and lightweight design, the DSO-TC4 is ideal for both the workshop and the field. Fnirsi DSO-TC4
zł259.00
6 weeks
No product available!
Fnirsi DSO153 is a portable oscilloscope with high functionality, ideal for hobbyists in electronics. With its compact design, high-resolution display, and long battery life, this device is perfect for use in the field and in the workshop. The built-in signal generator and easy operation with a single AUTO button further enhance its versatility. Fnirsi DSO153
zł130.92
24h
Available quantity: 3
Available
Digital oscilloscope with compact dimensions. It offers a frequency bandwidth of 200 kHz and a sampling rate of 2.5 MS/s. Equipped with a 2.8" colour display with a resolution of 320x240 pixels. Fnirsi DSO152
zł86.90
24h
Available quantity: 30
Available
Portable digital oscilloscope with two measurement channels. It offers a frequency bandwidth of 100 MHz and at a sampling rate of 1 GS/s. It has a large, clear 7" LCD display with touch panel. Fnirsi 1013D
zł735.37
24h
Available quantity: 17
Available
Portable digital oscilloscope with built-in signal generator and multimeter. It has two measurement channels with a bandwidth of 10 MHz and a single-channel signal generator with a frequency of up to 2 MHz. Fnirsi 2C23T