Fnirsi 2C23T - 2-channel 10MHz portable oscilloscope with two probes in set
search
  • Fnirsi 2C23T - 2-channel 10MHz portable oscilloscope with two probes in set
  • Fnirsi 2C23T - 2-channel 10MHz portable oscilloscope with two probes in set
  • Fnirsi 2C23T - 2-channel 10MHz portable oscilloscope with two probes in set
ID: 1188918
5906623485161
zł294.07
Tax included

zł239.08 tax excl.

Portable digital oscilloscope with built-in signal generator and multimeter. It has two measurement channels with a bandwidth of 10 MHz and a single-channel signal generator with a frequency of up to 2 MHz. Fnirsi 2C23T High profile

6 weeks
Awaiting delivery
Kamami is the official distributor of Fnirsi measuring tools. All products of this brand in our offer are original and come directly from the manufacturer.

Description

Portable digital oscilloscope with built-in signal generator and multimeter. It is equipped with an LCD display with a diagonal of 2.8" and a resolution of 320x240 pixels with the ability to adjust the contrast. It has two measurement channels and is characterized by good operating parameters, including a bandwidth of 10 MHz, a sampling rate of 50 MSa/s and a 32 kB memory buffer. Additionally The oscilloscope offers a single-channel signal generator with a frequency of up to 2 MHz, which can generate sine wave, square wave, triangle signal and noise. It also allows the device to be used as a multimeter to measure AC and DC voltage, AC and DC current, resistance, capacitance and temperature. It is powered by a built-in battery and charged via a USB Type-C connector. It is a useful measurement tool widely used in various fields such as communications, aviation, embedded systems, computers, research and education.

Features

Oscilloscope

  • Number of channels: 2
  • Frequency band: 10MHz
  • Sampling rate: 50 MSa/s
  • Triggering:
    • Type: for slope
    • Mode: auto, normal, single
    • Slope: rising, falling
    • CH1/CH2 source
  • DC, AC or GND coupling
  • Impedance: 1 MΩ
  • Time base: 50 ns to 10 s
  • Vertical sensitivity: 20 mV/div to 10V/div (X1)
  • Maximum voltage: 400V

Generator

  • Number of channels: 1
  • Maximum frequency: 1 Hz to 2 MHz
  • Standard waveforms: sine wave, square wave, triangle signal, noise, DC output

Multimeter

  • DC voltage: 10V, 100V, 1000V ± (0.5% + 3)
  • AC voltage: 10V, 100V, 750V ± (1% + 3)
  • Constant current: 1000uA, 100mA, 1000mA, 10A ± (1.2% + 3)
  • AC current: 1000uA, 100mA, 1000mA, 10A ± (1.5% + 3)
  • Resistance: 1000Ω, 10kΩ, 100kΩ, 1000kΩ, 10MΩ ± (0.5%±3), 100MΩ ± (1.5%±3)
  • Capacitance: 10nF, 100nF, 1uF, 10uF, 100uF ±(2% + 5)
  • Temperature: -55°C to 1300°C ±(2.5% + 5)
  • Diode test: 0V to 1V
  • Circuit continuity test

General parameters

  • TFT color LCD display with a diagonal of 2.8" and a resolution of 320 x 240 pixels
  • Power supply: 3000 mAh battery
  • USB Type-C charging
  • Dimensions 167 x 89 x 35 mm
  • Weight: 300g

Kit contains

  • Oscilloscope
  • Test leads
  • Probe - 2 PCS.
  • USB cable
  • Cables for a multimeter

1188918

Data sheet

Type of oscilloscope
Portable
Bandwidth
10 MHz
Sampling rate
50 Ms/s
Memory depth
32 Kpts
Number of channels
2

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Other products in the same category (16)