PP-80 - oscilloscope probe x10 600V 60MHz
ID: 1183458
5906623435098
zł29.00
Tax included
zł23.58 tax excl.
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 60 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-80
Description
Universal oscilloscope probe with BNC connector, 10:1 voltage divider and 60 MHz frequency response. It allows you to make measurements with a maximum voltage of up to 600 V. The probe is terminated with a sharp tip on which a cap with a hook can be applied, while the ground wire has a crocodile connector. It can work with analog and digital oscilloscopes with a standard BNC connector.
Features
- Bandwidth:
- x1: 6 MHz
- x10: 60 MHz
- Maximum voltage:
- x1: 200 V DC + Peak AC
- x10: 600 V DC + Peak AC
- Attenuation: x1, x10
- Input impedance: 1 MΩ, 100 MΩ
- Input capacitance:
- x1: 85pF - 115pF
- x10: 18.5pF - 22.5pF
- Compensation range: 20 pF to 40 pF
- Cable length: 120 cm
- Operating temperature: -10 to 50°C
- Operating humidity: up to 85%
Kit contains
- Oscilloscope probe with BNC connector
- Measuring cap
- Set of color markers
1183458
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A multifunctional device (computer attachment) that combines a 2-channel digital oscilloscope and a 16-channel logic analyzer. Hantek6022BL
zł383.75
24h
Available quantity: 5
Available
Digital oscilloscope. It has two measurement channels with 150 MHz bandwidth. Hantek DSO2C15
zł959.77
24h
Available quantity: 3
Available
Digital oscilloscope with built-in signal generator. It has two measurement channels with 150 MHz bandwidth and a single-channel signal generator with waveform frequencies up to 25 MHz. Hantek DSO2D15
zł1,046.84
Delivery date unknown
No product available!
A 2-channel digital oscilloscope with built-in WiFi module. It offers a frequency bandwidth of 70 MHz and sampling rates of up to 250 MS/s. It can work with Windows computers and iOS and Android mobile devices. Hantek iDSO1070A
zł1,399.00
24h
Available quantity: 3
Available
Other products in the same category (16)
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 200 MHz, it can be connected to the oscilloscope via the BNC connector. Micsig MOIP200P
zł18,018.44
4 weeks
No product available!
Test probe tip with 50X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 800 MHz and 1 GHz frequency band. Micsig OP50-1G
zł6,599.00
4 weeks
No product available!
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP1500
zł1,151.14
4 weeks
No product available!
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 350 MHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP350P
zł49,999.00
4 weeks
No product available!
Micsig P130A is a reliable oscilloscope probe, ideal for precise measurements in high-voltage systems with a wide frequency range
zł150.05
4 weeks
No product available!
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-2.8mm
zł47.92
24h
Available quantity: 10
Available
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP1502
zł2,011.26
4 weeks
No product available!
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3002
zł2,321.81
4 weeks
No product available!
A probe tip with attenuation factor of 2000X. Dedicated to Micsig probes from the SigOFIT series operating in the frequency band of 100MHz, 200MHz and 350MHz. Micsig OP2000-3
zł2,491.68
4 weeks
No product available!
The Micsig P300 oscilloscope probe with a BNC connector offers a bandwidth of 300 MHz and a maximum input voltage of 600 V, enabling precise measurements of high-frequency and high-voltage signals. Its high input impedance minimizes impact on the circuit under test, ensuring measurement accuracy. The standard BNC connector ensures compatibility with most oscilloscopes, making it a versatile tool for laboratories and engineering applications.
zł201.82
4 weeks
No product available!
The Zeenko 6 dB SMA attenuator is a solid and precise component for RF measurement paths, useful in diagnostics, calibration and protecting devices such as the tinySA, nanoVNA or RF generators. It enables safe measurements and improves impedance matching quality over a wide frequency range.
zł50.64
24h
Available quantity: 10
Available
Test probe tip with 50X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 350 MHz and 500 MHz frequency bands. Micsig OP50-5
zł4,598.99
4 weeks
No product available!
A probe with a Rogowski coil dedicated to measuring current in a wide frequency range. Measurements can be made without modifying the circuit under test. Micsig RCP500
zł999.01
4 weeks
No product available!
Test probe tip with 1000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP1000-2
Product available on request. Please send your inquiry to the following address: sales@kamami.com
zł2,600.76
Delivery date unknown
No product available!
Universal oscilloscope probe with BNC plug and 10:1 voltage divider. It has a frequency range of 60 MHz and allows you to perform measurements with a maximum voltage of up to 600 V.
zł47.75
24h
Available quantity: 2
Available
Probe for measuring AC currents up to 1000 A. It works in the range from 10 Hz to 100 kHz, it can be connected to the oscilloscope through the BNC connector. Micsig ACP1000
zł1,199.03
24h
Available quantity: 1
Available
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 60 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-80