MOIP100P - isolated 100MHz fiber optic probe for Micsig oscilloscopes
ID: 1187014
zł12,099.01
Tax included
zł9,836.59 tax excl.
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 100 MHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. MOIP100P
Description
An isolated fiber optic probe that works in the frequency band up to 100 MHz. It uses a standard BNC interface and can be connected to an oscilloscope or multimeter. Utilizing SigOFIT optical isolation technology, it offers high accuracy and excellent suppression of oscillations caused by high-frequency common-mode noise.
The probe has excellent amplitude-frequency characteristics and the DC gain accuracy is less than 1%. The maximum noise floor in this range is 1.41 mVrms and the zero drift is less than 500 μV. It is an excellent choice for the study of third generation semiconductors and devices based on SiC and GaN. The probe test leads are short and have an input capacitance of less than 3 pF when transmitted via coaxial cable, allowing for very safe testing.
Unlike traditional differential probes that can only test high-voltage signals, the SigOFIT can be used with a variety of tips to test differential mode signals from ±1.25 V to ±2500 V, achieving full output range and very high signal to ratio noise. It will be used in industry, automotive electronics, when servicing power supplies and inverters. It is dedicated to Micsig devices.
Features
- Bandwidth: 100MHz
- Rise time: 3.5 ns
- SMA input impedance: 1MΩ || 10pF
- Output voltage: ±2.5V
- Measuring ranges:
- 1X: ±2.5V
- 10X: ±25V
- 20X: ±50V
- 500X: ±1250V
- 1000X: ±2500V
- Noise: <1.41mVrms
- Signal Delay: ＜15.42ns
- DC Gain Accuracy: 1%
- Common mode voltage range: 60kVpk
- Power: DC 5V, USB Type-C
- Cord length: 2m
Kit contains
- Probe
- USB Type-C cable
- Probe holder
- 25W USB charger
- 5 x MCX adapter with 2.54mm pitch
- 5 x MCX adapter with 5.05mm pitch
- MCX coaxial cable
- 10X probe tip
- Case
1187014
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Test probe tip with 10X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP10-2
Product available on request. Please send your inquiry to the following address: sales@kamami.com
zł2,599.00
Delivery date unknown
No product available!
Test probe tip with 10X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP10-2
Product available on request. Please send your inquiry to the following address: sales@kamami.com
zł2,600.76
Delivery date unknown
No product available!
Test probe tip with 1000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP1000-2
Product available on request. Please send your inquiry to the following address: sales@kamami.com
zł2,600.76
Delivery date unknown
No product available!
Other products in the same category (16)
Probe for measuring direct and alternating current up to 100 A. It works in the 800 kHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100A
zł1,462.80
4 weeks
No product available!
Probe for measuring direct and alternating current up to 100 A. It works in the 2,5 MHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100B
zł2,462.67
4 weeks
No product available!
Universal oscilloscope probe with BNC plug with 100: 1 voltage divider and 100 MHz bandwidth. It allows you to perform measurements with a maximum voltage of 2 kV
zł64.49
24h
Available quantity: 3
Available
Probe for measuring direct and alternating current up to 30 A. Works in the band up to 100 MHz, can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP1003B
zł3,427.73
4 weeks
No product available!
Probe for measuring direct and alternating current up to 30 A. Works in the band up to 50 MHz, can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP503B
zł3,431.45
4 weeks
No product available!
Probe for measuring AC currents up to 1000 A. It works in the range from 10 Hz to 100 kHz, it can be connected to the oscilloscope through the BNC connector. Micsig ACP1000
zł1,199.03
24h
Available quantity: 1
Available
A probe with a Rogowski coil dedicated to measuring current in a wide frequency range. Measurements can be made without modifying the circuit under test. Micsig RCP500
zł999.01
4 weeks
No product available!
A 20:1 signal attenuator designed to assist in measuring automotive performance, including measuring fuel injector and primary ignition runs. Hantek HT201
zł51.99
4 weeks
No product available!
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 60 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-80
zł20.91
4 weeks
No product available!
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-150
zł30.00
4 weeks
No product available!
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 200 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-200
zł66.59
24h
Available quantity: 21
Available
High-voltage oscilloscope probe with BNC connector and 100:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 2 kV. Hantek T3100
zł92.69
24h
Available quantity: 1
Available
A probe for measuring AC and DC currents up to 65 A. It operates in a bandwidth of up to 20 kHz and can be connected to an oscilloscope via a BNC connector. Hantek CC-65
zł322.27
4 weeks
No product available!
A probe for measuring AC and DC currents up to 650 A. It operates in a bandwidth of up to 400 Hz and can be connected to an oscilloscope via a BNC connector. Hantek CC-650
zł418.16
4 weeks
No product available!
The housing for the DSO138 oscilloscope allows for easy storage and mobile use of the device. It protects the PCB and any microcircuits on it from dirt or accidental damage.
zł14.90
24h
Available quantity: 7
Available
Universal oscilloscope probe with BNC connector. It has a voltage divider of 10:1 and offers a frequency response of 100 MHz. It allows measurements with a maximum voltage of up to 600 V. P6100
zł54.16
24h
Available quantity: 10
Available
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 100 MHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. MOIP100P