Hantek HT8050 - 50MHz high voltage differential probe
ID: 1185326
5906623476336
zł938.99
Tax included
zł763.41 tax excl.
High-voltage differential probe. It has good measurement characteristics: a bandwidth of 50 MHz and an operating voltage of up to 1300 V. The probe has two attenuation coefficients: 50X and 500X. Hantek HT8050
Description
High-voltage differential probe for measuring the difference in voltage between two test points not related to the earth potential. The device allows the observation of non-grounded, variable waveforms and single measurements. The probe has good measurement characteristics: a bandwidth of 50 MHz and an operating voltage of up to 1300 V. It has two attenuation coefficients: 50X and 500X adjustable by the user.
Features
- Bandwidth: 50 MHz
- Rise time: 7 ns
- Attenuation: 50X, 500X
- Accuracy: 2%
- Maximum differential test voltage (DC+AC PK): 130 V (10X), 1300 V (100X)
- Maximum input voltage in common mode (DC+AC PK): CAT II 600V, CAT I 1000V
- Input noise reference: ≤1.5mVrms (10X), ≤1 mVrms (100X)
- Common mode rejection ratio: <80dB (DC), <50dB (1MHz),<＞60dB (100kHz)
- Input impedance: 8MΩ/3.5pF (differential), 4MΩ/7pF (one input to ground)
- Overshoot alarm: pushbutton indicator light illumination
- Length of input cable: approx. 60 cm
- Length of output cable: approx. 90 cm
- Power supply: 9 V DC, 1000 mA
- Dimensions: 120 x 55 x 24 mm
Kit contains
- Measuring probe
- 2 x crocodile clip
- 2 x hook clip
1185326
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 60 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-80
zł24.46
Delivery date unknown
No product available!
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-150
zł30.58
Delivery date unknown
No product available!
High-voltage differential probe. It has good measurement characteristics: a bandwidth of 100 MHz and an operating voltage of up to 1300 V. The probe has two attenuation coefficients: 50X and 500X. Hantek HT8100
zł1,349.00
Delivery date unknown
No product available!
Other products in the same category (16)
A probe for measuring AC and DC currents up to 65 A. It operates in a bandwidth of up to 20 kHz and can be connected to an oscilloscope via a BNC connector. Hantek CC-65
zł357.17
4 weeks
No product available!
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP1502
zł2,011.26
24h
Available quantity: 1
Available
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is perfect for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP60XS
zł4,182.00
4 weeks
No product available!
Cable (adapter) of a BNC connector to banana plugs. Allows convenient connection of a device to an oscilloscope, for example. BNC Q9
zł12.76
24h
Available quantity: 10
Available
A set of needle probes used for piercing wire insulation. They can be used as pin probes when working with small PCBs or connectors. Hantek HT307
zł34.00
4 weeks
No product available!
Test probe tip with 50X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 350 MHz and 500 MHz frequency bands. Micsig OP50-5
zł4,598.99
4 weeks
No product available!
Probe for measuring AC currents up to 1000 A. It works in the range from 10 Hz to 100 kHz, it can be connected to the oscilloscope through the BNC connector. Micsig ACP1000
zł1,199.03
24h
Available quantity: 1
Available
An oscilloscope probe designed to analyze signals generated by the ignition coil in car engines. It is compatible with most digital oscilloscopes. Micsig MS-A-008
zł142.45
24h
Available quantity: 2
Available
Universal oscilloscope probe with BNC connector and 10:1 voltage divider. It has a frequency response of 80 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-90
zł40.00
24h
Available quantity: 19
Available
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 350 MHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP350P
zł49,999.00
4 weeks
No product available!
Oscilloscope probe designed to analyze signals generated by the ignition coil in car engines. It is compatible with most digital oscilloscopes. Hantek HT25COP
zł440.00
24h
Available quantity: 1
Available
High-voltage oscilloscope probe with BNC connector and 100:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 2 kV. Hantek T3100
zł103.20
24h
Available quantity: 1
Available
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 200 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-200
zł73.82
24h
Available quantity: 17
Available
A probe tip with attenuation factor of 5000X. Dedicated to Micsig probes from the SigOFIT series operating in the frequency band of 100MHz, 200MHz and 350MHz. Micsig OP5000-3
zł3,874.19
4 weeks
No product available!
LCRkelvin is a four-wire Kelvin probe for precise measurement of RLC components with minimal wire resistance impact. Equipped with gold-plated Kelvin clips, it ensures accuracy and reliability, and its design is compatible with LCR meters from various brands, such as Hantek and Uni-T
zł141.61
24h
Available quantity: 3
Available
Probe for measuring direct and alternating current up to 30 A. Works in the band up to 100 MHz, can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP1003B
zł3,427.73
24h
Available quantity: 1
Available
High-voltage differential probe. It has good measurement characteristics: a bandwidth of 50 MHz and an operating voltage of up to 1300 V. The probe has two attenuation coefficients: 50X and 500X. Hantek HT8050