zł10,639.61
.png)
New products
New products New products
Hantek PP-80B oscilloscope probe
ID: 1191574
5906623487301
zł23.39
Tax included
zł19.02 tax excl.
The PP80B oscilloscope probe is a reliable tool for precise measurements, compatible with digital and analog oscilloscopes, offering a bandwidth of up to 80 MHz and the ability to select the attenuation factor. Hantek PP-80B
Description
The PP80B oscilloscope probe is a high-quality accessory designed to work with digital and analog oscilloscopes. With a bandwidth of up to 80 MHz and an input voltage of up to 600 V DC, the probe is perfect for precise measurements in a variety of applications. Equipped with a switch for selecting the x1 or x10 damping coefficient, it allows you to adjust the operating parameters depending on your measurement needs. The probe has an adjustable compensation range and a standard BNC connector, which ensures compatibility with a wide range of oscilloscopes.
Features
- Bandwidth: DC-80MHz (x10), DC-6MHz (x1)
- Input voltage: <200V DC +Peak AC (x1), <600V DC +Peak AC (x10)
- Input resistance: 1MΩ (x1), 10MΩ (x10)
- Input Capacitance: 85pF-120pF (x1), 18.5pF-22.5pF (x10)
- Compensation range: 20pF-40pF
- Weight: 55 g
- Cable length: 120 cm
Package content
- PP80B oscilloscope probe
- Ground cable with crocodile clip
- Screwdriver to adjust the capacity
- 4 pairs of colored rings (for marking probes)
1191574
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 60 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-80
zł21.50
24h
Available quantity: 39
Available
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-150
zł30.87
24h
Available quantity: 17
Available
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 200 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-200
zł68.51
24h
Available quantity: 25
Available
High-voltage oscilloscope probe with BNC connector and 100:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 2 kV. Hantek T3100
zł92.21
24h
Available quantity: 2
Available
A probe for measuring AC and DC currents up to 65 A. It operates in a bandwidth of up to 20 kHz and can be connected to an oscilloscope via a BNC connector. Hantek CC-65
zł349.00
24h
Available quantity: 6
Available
A probe for measuring AC and DC currents up to 650 A. It operates in a bandwidth of up to 400 Hz and can be connected to an oscilloscope via a BNC connector. Hantek CC-650
zł457.54
4 weeks
No product available!
The housing for the DSO138 oscilloscope allows for easy storage and mobile use of the device. It protects the PCB and any microcircuits on it from dirt or accidental damage.
zł14.90
24h
Available quantity: 7
Available
Universal oscilloscope probe with BNC connector. It has a voltage divider of 10:1 and offers a frequency response of 100 MHz. It allows measurements with a maximum voltage of up to 600 V. P6100
zł53.28
24h
Available quantity: 19
Available
Oscilloscope probe designed for the analysis of signals generated by the ignition coil in automotive engines. It is compatible with most digital oscilloscopes. Hantek HT25
zł125.00
24h
Available quantity: 7
Available
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-2.8mm
zł47.92
4 weeks
No product available!
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-2.3mm
zł48.40
24h
Available quantity: 5
Available
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-1.5mm
zł48.40
24h
Available quantity: 4
Available
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-1.0mm
zł48.40
24h
Available quantity: 5
Available
Cable (adapter) of a BNC connector to banana plugs. Allows convenient connection of the device to an oscilloscope, for example. Hantek HT30A
zł35.83
4 weeks
No product available!
Cable (adapter) of a BNC connector to banana plugs. Allows convenient connection of a device to an oscilloscope, for example. BNC Q9
zł11.38
24h
Available quantity: 8
Available
Probe for measuring direct current up to 800 A and alternating current up to 500 A. Operates at 5 kHz and can be connected to an oscilloscope via a BNC connector. Powered via USB. Hantek CC-800
zł614.99
24h
Available quantity: 1
Available
The PP80B oscilloscope probe is a reliable tool for precise measurements, compatible with digital and analog oscilloscopes, offering a bandwidth of up to 80 MHz and the ability to select the attenuation factor. Hantek PP-80B