PP-250 Osciloscope probe 250MHz
ID: 1195415
5906623497928
zł99.90
Tax included
zł81.22 tax excl.
The Hantek PP-250 is an oscilloscope probe with a bandwidth of 250 MHz, designed for precise high-frequency signal measurements. Equipped with a 1×/10× attenuation switch, it allows flexible adjustment for various measurement applications. Its ergonomic design and solid construction ensure comfortable use and long-lasting durability in everyday laboratory work.
Description
The Hantek PP-250 is an oscilloscope probe with a bandwidth of up to 250 MHz, designed for accurate high-frequency signal measurements. Featuring a x1/x10 attenuation switch, it allows for flexible adaptation to various applications, while its ergonomic design and lightweight build provide comfort during laboratory or service work. The Hantek PP-250 is a reliable tool for engineers, technicians, and hobbyists who require precise and stable measurements across a wide frequency range.
Specifications
-
Bandwidth: DC–6 MHz (x1), DC–250 MHz (x10)
-
Input voltage: <200 V (x1), <600 V (x10)
-
Input resistance: 1 MΩ (x1), 10 MΩ (x10)
-
Input capacitance: 85–115 pF (x1), 18.5–22.5 pF (x10)
-
Compensation range: 15–35 pF
-
Connector: BNC
-
Cable length: 120 cm
-
Weight: 55 g
Included in the set:
-
PP-250 oscilloscope probe
-
Ground lead with alligator clip
-
Trimming screwdriver
-
4 pairs of color-coded rings for probe identification
1195415
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-150
zł30.87
24h
Available quantity: 60
Available
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 200 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-200
zł66.59
24h
Available quantity: 13
Available
High-voltage oscilloscope probe with BNC connector and 100:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 2 kV. Hantek T3100
zł92.21
24h
Available quantity: 10
Available
A probe for measuring AC and DC currents up to 65 A. It operates in a bandwidth of up to 20 kHz and can be connected to an oscilloscope via a BNC connector. Hantek CC-65
zł322.27
4 weeks
No product available!
A probe for measuring AC and DC currents up to 650 A. It operates in a bandwidth of up to 400 Hz and can be connected to an oscilloscope via a BNC connector. Hantek CC-650
zł418.16
4 weeks
No product available!
The housing for the DSO138 oscilloscope allows for easy storage and mobile use of the device. It protects the PCB and any microcircuits on it from dirt or accidental damage.
zł14.90
24h
Available quantity: 7
Available
Universal oscilloscope probe with BNC connector. It has a voltage divider of 10:1 and offers a frequency response of 100 MHz. It allows measurements with a maximum voltage of up to 600 V. P6100
zł54.16
24h
Available quantity: 4
Available
Oscilloscope probe designed for the analysis of signals generated by the ignition coil in automotive engines. It is compatible with most digital oscilloscopes. Hantek HT25
zł133.54
24h
Available quantity: 2
Available
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-2.8mm
zł47.92
24h
Available quantity: 8
Available
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-2.3mm
zł47.90
4 weeks
No product available!
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-1.5mm
zł47.90
4 weeks
No product available!
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-1.0mm
zł47.90
4 weeks
No product available!
Cable (adapter) of a BNC connector to banana plugs. Allows convenient connection of the device to an oscilloscope, for example. Hantek HT30A
zł35.28
24h
Available quantity: 2
Available
Cable (adapter) of a BNC connector to banana plugs. Allows convenient connection of a device to an oscilloscope, for example. BNC Q9
zł11.38
4 weeks
No product available!
Probe for measuring direct current up to 800 A and alternating current up to 500 A. Operates at 5 kHz and can be connected to an oscilloscope via a BNC connector. Powered via USB. Hantek CC-800
zł625.10
24h
Available quantity: 1
Available
High-voltage differential probe. It has good measurement characteristics: a bandwidth of 50 MHz and an operating voltage of up to 1300 V. The probe has two attenuation coefficients: 50X and 500X. Hantek HT8050
zł925.43
24h
Available quantity: 1
Available
The Hantek PP-250 is an oscilloscope probe with a bandwidth of 250 MHz, designed for precise high-frequency signal measurements. Equipped with a 1×/10× attenuation switch, it allows flexible adjustment for various measurement applications. Its ergonomic design and solid construction ensure comfortable use and long-lasting durability in everyday laboratory work.