Hantek CC-800 - current probe for 800A oscilloscopes
ID: 1185325
5906623435210
zł635.00
Tax included
zł516.26 tax excl.
Probe for measuring direct current up to 800 A and alternating current up to 500 A. Operates at 5 kHz and can be connected to an oscilloscope via a BNC connector. Powered via USB. Hantek CC-800
Description
Probe for measuring direct current up to 800 A and alternating current up to 500 A. It uses a standard BNC interface and can be connected to an oscilloscope or multimeter. It operates at 5 kHz and has two measurement ranges: 40 and 500/800 A. It is powered by a 9 V battery. It will find applications in industry, automotive electronics, power supplies or inverters.
Features
- Bandwidth: 5 kHz
- Ranges: 40 A or 500/800 A
- Sensitivity: 10 mV/A (40A), 1 mV/A (500/800A)
- Accuracy:
- 1.5% ± 0.5 A (40A DC)
- 1,5% ± 0,5 A (800 A DC)
- 2% ± 0,5 A (40 A AC)
- 2% ± 0.5 A (500 A AC)
- Measuring range:
- 10 A to 40 A
- 1 A to 500/800 A
- Maximum cable diameter: 30 mm
- Overload indication: buzzer, lamp
- BNC connector
- Power supply: 9 V 6F22
- Dimensions: 195 x 70 x 33 mm
- Weight: 250 g
1185325
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 60 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-80
zł22.47
24h
Available quantity: 27
Available
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-150
zł28.11
24h
Available quantity: 25
Available
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 200 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-200
zł73.82
24h
Available quantity: 5
Available
Oscilloscope probe designed for the analysis of signals generated by the ignition coil in automotive engines. It is compatible with most digital oscilloscopes. Hantek HT25
zł133.54
24h
Available quantity: 10
Available
Other products in the same category (16)
Micsig P130A is a reliable oscilloscope probe, ideal for precise measurements in high-voltage systems with a wide frequency range
zł150.05
24h
Available quantity: 3
Available
The housing for the DSO138 oscilloscope allows for easy storage and mobile use of the device. It protects the PCB and any microcircuits on it from dirt or accidental damage.
zł14.90
24h
Available quantity: 7
Available
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-2.8mm
zł47.92
24h
Available quantity: 10
Available
Test probe tip with 20X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 800 MHz and 1 GHz frequency band. Micsig OP20-1G
zł6,599.00
4 weeks
No product available!
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-1.5mm
zł47.90
24h
Available quantity: 4
Available
High-voltage differential probe. It has good measurement characteristics: a bandwidth of 50 MHz and an operating voltage of up to 1300 V. The probe has two attenuation coefficients: 50X and 500X. Hantek HT8050
zł938.99
4 weeks
No product available!
Universal measurement probes for a multimeter. Compatible with all Micsig oscilloscopes. Micsig MS-A-005
zł44.94
24h
Available quantity: 2
Available
Test probe tip with 50X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 350 MHz and 500 MHz frequency bands. Micsig OP50-5
zł4,598.99
4 weeks
No product available!
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 300 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig MDP1503
zł3,906.17
24h
Available quantity: 2
Available
A probe for measuring AC and DC currents up to 650 A. It operates in a bandwidth of up to 400 Hz and can be connected to an oscilloscope via a BNC connector. Hantek CC-650
zł475.00
4 weeks
No product available!
Test probe tip with 1000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP1000-2
Product available on request. Please send your inquiry to the following address: sales@kamami.com
zł2,600.76
Delivery date unknown
No product available!
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 500 MHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP500P
zł74,999.00
4 weeks
No product available!
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 100 MHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. MOIP100P
zł12,099.01
4 weeks
No product available!
A probe tip with attenuation factor of 2000X. Dedicated to Micsig probes from the SigOFIT series operating in the frequency band of 100MHz, 200MHz and 350MHz. Micsig OP2000-3
zł2,491.68
4 weeks
No product available!
Oscilloscope Probes (pair). 460-004
zł136.75
24h
Available quantity: 3
Available
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-150
zł28.11
24h
Available quantity: 25
Available
Probe for measuring direct current up to 800 A and alternating current up to 500 A. Operates at 5 kHz and can be connected to an oscilloscope via a BNC connector. Powered via USB. Hantek CC-800