DP702 - 200MHz high voltage differential probe
ID: 1188726
5906623400096
zł2,077.47
Tax included
zł1,689.00 tax excl.
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP702
Description
The differential probe based on Micsig's advanced SigOFIT technology is a modern tool that is characterized by a very low noise level, excellent amplitude and frequency characteristics at high voltage and an advanced ability to reject common-mode signals. Thanks to these features, users can easily test high-frequency and voltage signals. The probe has a bandwidth limit of 5 MHz, which effectively eliminates high-frequency noise when measuring transistor switching frequencies in most switching power supplies. Additionally, the zero point calibration function allows you to zero the probe instantly. The probe also offers dual-range capability, improving signal-to-noise ratio and adapting to a variety of test requirements. The standard BNC connector allows operation with any oscilloscope, and the power supply from the USB port eliminates the need for additional power sources.
Additional features, such as an overvoltage alarm with a flashing LED and an out-of-range alarm, allow the user to quickly respond to possible problems. The DP probe also stands out for its compact and aesthetic design, much smaller than traditional differential probes. Moreover, it is characterized by excellent bandwidth uniformity, with amplitude fluctuations below 0.5 dB in the half-band range, even in the case of high frequencies, which guarantees high measurement precision. High input impedance and low capacitance minimize the loading effect, which greatly improves the accuracy of differential signal measurement.
The probe can be widely used for AC voltage measurements, high voltage insulation measurements, and the design of switching power supplies and power converters. It is a versatile and flexible tool useful both in an electronics workshop and in an industrial environment.
Features
- Frequency band: 200MHz
- Rise time: ≤ 1.75 ns
- Attenuation Ratio: 20X, 200X
- Accuracy: ±2%
- Max. differential voltage (DC+AC PK):
- 20X: 70V
- 200X: 700V
- Max. common mode voltage: CAT I 600V, CAT II 450V
- Noise:
- Full Bandwidth:
- 20X: ≤ 22mVrms
- 200X: ≤ 80mVrms
- 5MHz Bandwidth Limit:
- 20X: ≤ 8mVrms
- 200X: ≤ 70mVrms
- Full Bandwidth:
- CMRR:
- DC: > -80dB
- 100 kHz: > -60dB
- 10 MHz: > -30dB
- 100 MHz: > -26dB
- Input impedance:
- Differential mode: 16 MΩ, 1.5 pF
- Common mode: 8 MΩ, 3 pF
- Delay:
- 20X: 11.99 ns
- 200X: 12.27 ns
- Output voltage: ≤3V
- Bandwidth limit: 5MHz
- Quick zero point calibration function
- Two working ranges
- Signaling of exceeding the permissible voltage: LED and buzzer
- BNC connector
- Power supply: USB Type-C
- Operating temperature range: 0℃ to 40℃
- Cable length: 8 cm (input), 120 cm (output)
- Control module dimensions: 91 x 33 x 15 mm
- Signal module dimensions: 100 x 36 x 20 mm
Kit contains
- Differential probe
- USB cable
- 2 x alligator clips
- 2 x measuring tip
1188726
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A portable tablet oscilloscope with a 10.1 inch LCD display and a touch screen. It has four channels and has good measurement parameters: 300 MHz bandwidth, 2 GSa/s sampling rate and 220 Mpts memory buffer. Micsig TO3004
zł5,699.00
24h
Available quantity: 1
Available
A portable oscilloscope for automotive applications with an 8-inch LCD display and a touch screen. It has four channels and has good measurement parameters: 100 MHz bandwidth, 1 GSa/s sampling rate and 70 Mpts memory buffer. Micsig SATO1004 Plus
zł3,816.68
Delivery date unknown
No product available!
A portable Smart oscilloscope with an 8-inch LCD display and a touch screen. It has two measurement channels and has good measurement parameters: 300 MHz band, 2 GSa/s sampling rate and 280 Mpts memory buffer. Micsig STO2302C
zł4,386.35
24h
Available quantity: 1
Available
Other products in the same category (16)
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 300 A, offering a wide bandwidth from 7 Hz to 25 MHz and a sensitivity of 20 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit being tested, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP300S-200
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high amplitude alternating currents up to 600 A, offering a wide bandwidth from 5 Hz to 25 MHz and a sensitivity of 10 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit being tested, which is useful in the analysis of fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP600S-200
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 1200 A, offering a wide bandwidth from 5 Hz to 25 MHz and a sensitivity of 5 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP1200S-200
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 3000 A, offering a wide bandwidth from 3 Hz to 25 MHz and a sensitivity of 2 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP3000S-200
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 6000 A, offering a wide bandwidth from 2 Hz to 25 MHz and a sensitivity of 1 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP6000S-200
zł4,797.00
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 6000 A, offering a wide bandwidth from 3 Hz to 10 MHz and a sensitivity of 1 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit being tested, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP6000S-700
zł3,387.38
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude AC currents up to 120 A, offering a wide bandwidth from 14 Hz to 25 MHz and a sensitivity of 50 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP120M-200
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 300 A, offering a wide bandwidth from 7 Hz to 25 MHz and a sensitivity of 20 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit being tested, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP300M-200
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 600 A, offering a wide bandwidth from 5 Hz to 25 MHz and a sensitivity of 10 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit being tested, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP600M-200
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 1200 A, offering a wide bandwidth from 5 Hz to 25 MHz and a sensitivity of 5 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP1200M-200
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 3000 A, offering a wide bandwidth from 3 Hz to 25 MHz and a sensitivity of 2 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit being tested, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP3000M-200
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 6000 A, offering a wide bandwidth from 2 Hz to 25 MHz and a sensitivity of 1 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit being tested, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP6000M-200
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 6000 A, offering a wide bandwidth from 3 Hz to 10 MHz and a sensitivity of 1 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit being tested, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP6000M-700
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 12,000 A, offering a wide bandwidth from 2 Hz to 10 MHz and a sensitivity of 0.5 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP12000M-700
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 600 A, offering a wide bandwidth from 8 Hz to 10 MHz and a sensitivity of 10 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit being tested, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP600L-700
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 1200 A, offering a wide bandwidth from 5 Hz to 10 MHz and a sensitivity of 5 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP1200L-700
zł5,338.20
4 weeks
No product available!
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP702