.png)
DP3002 - 200MHz high voltage differential probe
ID: 1188728
5906623400119
zł2,077.47
Tax included
zł1,689.00 tax excl.
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3002
Description
The differential probe based on Micsig's advanced SigOFIT technology is a modern tool that is characterized by a very low noise level, excellent amplitude and frequency characteristics at high voltage and an advanced ability to reject common-mode signals. Thanks to these features, users can easily test high-frequency and voltage signals. The probe has a bandwidth limit of 5 MHz, which effectively eliminates high-frequency noise when measuring transistor switching frequencies in most switching power supplies. Additionally, the zero point calibration function allows you to zero the probe instantly. The probe also offers dual-range capability, improving signal-to-noise ratio and adapting to a variety of test requirements. The standard BNC connector allows operation with any oscilloscope, and the power supply from the USB port eliminates the need for additional power sources.
Additional features, such as an overvoltage alarm with a flashing LED and an out-of-range alarm, allow the user to quickly respond to possible problems. The DP probe also stands out for its compact and aesthetic design, much smaller than traditional differential probes. Moreover, it is characterized by excellent bandwidth uniformity, with amplitude fluctuations below 0.5 dB in the half-band range, even in the case of high frequencies, which guarantees high measurement precision. High input impedance and low capacitance minimize the loading effect, which greatly improves the accuracy of differential signal measurement.
The probe can be widely used for AC voltage measurements, high voltage insulation measurements, and the design of switching power supplies and power converters. It is a versatile and flexible tool useful both in an electronics workshop and in an industrial environment.
Features
- Frequency band: 200MHz
- Rise time: ≤ 1.75 ns
- Attenuation Ratio: 100X, 1000X
- Accuracy: ±2%
- Max. differential voltage (DC+AC PK):
- 100X: 300V
- 1000X: 3000V
- Max. common mode voltage: CAT III 1000V
- Noise:
- Full Bandwidth:
- 100X: ≤ 90mVrms
- 1000X: ≤ 400mVrms
- 5MHz Bandwidth Limit:
- 100X: ≤ 40mVrms
- 1000X: ≤ 350mVrms
- Full Bandwidth:
- CMRR:
- DC: > -80dB
- 100 kHz: > -60dB
- 10 MHz: > -30dB
- 100 MHz: > -26dB
- Input impedance:
- Differential mode: 20 MΩ, 1.5 pF
- Common mode: 10 MΩ, 3 pF
- Delay:
- 100X: 11.99 ns
- 1000X: 12.27 ns
- Output voltage: ≤3V
- Bandwidth limit: 5MHz
- Quick zero point calibration function
- Two working ranges
- Signaling of exceeding the permissible voltage: LED and buzzer
- BNC connector
- Power supply: USB Type-C
- Operating temperature range: 0℃ to 40℃
- Cable length: 8 cm (input), 120 cm (output)
- Control module dimensions: 91 x 33 x 15 mm
- Signal module dimensions: 100 x 36 x 20 mm
Kit contains
- Differential probe
- USB cable
- 2 x alligator clips
- 2 x measuring tip
1188728
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
A portable tablet oscilloscope with a 10.1 inch LCD display and a touch screen. It has four channels and has good measurement parameters: 300 MHz bandwidth, 2 GSa/s sampling rate and 220 Mpts memory buffer. Micsig TO3004
zł5,699.00
24h
Available quantity: 1
Available
A portable oscilloscope for automotive applications with an 8-inch LCD display and a touch screen. It has four channels and has good measurement parameters: 100 MHz bandwidth, 1 GSa/s sampling rate and 70 Mpts memory buffer. Micsig SATO1004 Standard Kit
zł3,816.23
24h
Available quantity: 1
Available
A portable Smart oscilloscope with an 8-inch LCD display and a touch screen. It has two measurement channels and has good measurement parameters: 300 MHz band, 2 GSa/s sampling rate and 280 Mpts memory buffer. Micsig STO2302C
zł4,386.35
Delivery date unknown
No product available!
Other products in the same category (16)
This current probe is designed for measuring DC and AC current in power electronics systems and switching power supplies. It offers a 5 MHz DC bandwidth, a rise time of ≤ 70 ns, and two measurement ranges: 50 A and 300 A RMS, with a maximum peak current of up to 500 A. The device provides high measurement accuracy of ±1% and a resolution of up to 10 mA in the lower range. The BNC connector ensures compatibility with many oscilloscopes, and the 20 mm jaws enable current measurements in larger wires. Micsig CP3005
zł6,603.87
4 weeks
No product available!
Rogowski current probe designed for measuring high-amplitude AC currents up to 60 A, offering a wide bandwidth from 70 Hz to 30 MHz and a sensitivity of 100 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP60XS-80
zł4,939.68
4 weeks
No product available!
Rogowski current probe designed for measuring high-amplitude AC currents up to 120 A, offering a wide bandwidth from 34 Hz to 30 MHz and a sensitivity of 50 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP120XS-80
zł4,942.14
4 weeks
No product available!
Rogowski current probe designed for measuring high-amplitude AC currents up to 300 A, offering a wide bandwidth from 10 Hz to 30 MHz and a sensitivity of 20 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP300XS-80
zł5,462.43
4 weeks
No product available!
Rogowski current probe designed for measuring high-amplitude AC currents up to 600 A, offering a wide bandwidth from 8 Hz to 30 MHz and a sensitivity of 10 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP600XS-80
zł4,939.68
4 weeks
No product available!
Rogowski current probe designed for measuring high-amplitude AC currents up to 1200 A, offering a wide bandwidth from 5 Hz to 30 MHz and a sensitivity of 5 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP1200XS-80
zł4,942.14
4 weeks
No product available!
Rogowski current probe designed for measuring high-amplitude AC currents up to 3000 A, offering a wide bandwidth from 4 Hz to 30 MHz and a sensitivity of 2 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP3000XS-80
zł4,942.14
4 weeks
No product available!
Rogowski current probe designed for measuring high-amplitude AC currents up to 6000 A, offering a wide bandwidth from 4 Hz to 30 MHz and a sensitivity of 1 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP6000XS-80
zł4,821.60
4 weeks
No product available!
Rogowski current probe designed for measuring high-amplitude AC currents up to 12,000 A, offering a wide bandwidth from 2 Hz to 30 MHz and a sensitivity of 0.5 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful for analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP12000XS-80
zł4,942.14
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude AC currents up to 300 A, offering a wide bandwidth from 10 Hz to 20 MHz and a sensitivity of 20 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP300XS-200
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 600 A, offering a wide bandwidth from 7 Hz to 20 MHz and a sensitivity of 10 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP600XS-200
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude AC currents up to 1200 A, offering a wide bandwidth from 5 Hz to 20 MHz and a sensitivity of 2 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP1200XS-200
zł5,462.43
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 6000 A, offering a wide bandwidth from 3 Hz to 20 MHz and a sensitivity of 1 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP6000XS-200
zł5,462.43
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude AC currents up to 120 A, offering a wide bandwidth from 14 Hz to 25 MHz and a sensitivity of 50 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP120S-200
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 300 A, offering a wide bandwidth from 7 Hz to 25 MHz and a sensitivity of 20 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit being tested, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP300S-200
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high amplitude alternating currents up to 600 A, offering a wide bandwidth from 5 Hz to 25 MHz and a sensitivity of 10 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit being tested, which is useful in the analysis of fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP600S-200
zł5,338.20
4 weeks
No product available!
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3002