![Aluminum mounting profile for LED strips, V-shaped, black with a black cover Aluminum mounting profile for LED strips, V-shaped, black with a black cover](https://kamami.pl/48818-large_default/aluminum-mounting-profile-for-led-strips-v-shaped-black-with-a-black-cover.jpg)
![Aluminum mounting profile for LED strips, V-shaped, black with a black cover Aluminum mounting profile for LED strips, V-shaped, black with a black cover](https://kamami.pl/48818-large_default/aluminum-mounting-profile-for-led-strips-v-shaped-black-with-a-black-cover.jpg)
zł13.54 tax excl.
Aluminum mounting profile for LED strips. It is V-shaped, black in color with a black mask
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Aluminum mounting profile dedicated to LED strips up to 10 mm wide. It is easy to install, incl. with glue or thanks to the handles included in the set.
Provides protection against dirt. The LEDs are covered with a special cover made of polycarbonate, which ensures good light diffusion. The profile can be mounted both on the surface and built into prepared recesses.
The profile is not waterproof, therefore it can be used for lighting installations inside buildings and in places not exposed to direct weather conditions.
Blue LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21
Green LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21
RGB LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21
Red LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21
Corner connector for V-shaped mounting profiles. In black
No product available!
RGB LED matrix display with a resolution of 32 x 16 (512 LED). DFRobot DFR0471
No product available!
Yellow LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21
No product available!
3 mm LED matrix. The matrix contains 35 LEDs (5x7 system) in red. The diodes are connected by a common cathode.
IS31FL3731 LED Matrix Opto Feather Platform Evaluation Expansion Board. BLUE matrix. Adafruit 3137
Matrix with 4 WS2812B RGB diodes controlled by a serial signal. The module can be powered with 5V, only one signal line is required for control
LED strip with COB diodes in cold blue. It is powered by 12 V DC, has a length of 5 m and 384 LEDs/m. Protection level IP20
Waterproof LED indicator with a diameter of 8 mm, powered with the voltage from 9 to 12 V. Red color
FLUX LED 7.62 x 7.62 [mm] 5mm ultra blue, angle 90 degrees; light intensity 400 mcd (20mA) (3.2V) df 470nm 0.6 [lm]
No product available!
LED 5 mm tri-color angle 30 degrees, common anode RGB, RED - light intensity 1500 mcd (20mA) typ. (2.2V); df 630 nm, GREEN - light intensity 5000 mcd (20mA) typ. (3.2V); df 525 nm, BLUE - luminous intensity 1200 mcd (20mA) typ. (3.2V); df 475 nm
WS2812S is a three-color, closed in a housing with a controller, RGB diode in an SMD5050 housing with PLCC-6 terminals. The diodes can be connected in series, thanks to which you can control whole chains of such diodes with three wires.
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1200 mA, offering a wide beam angle of 120 °
Green LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21
Flexible LED (LED filament) in white, length 300 mm
No product available!
Aluminum mounting profile for LED strips. It is V-shaped, black in color with a black mask