RGB LED matrix display with a resolution of 32 x 16 (512 LED). Each LED can be controlled independently. At least 13 digital GPIOs are required to control the matrix. The matrix has 2 IDC connectors (DATA_IN, DATA_OUT) on the back, so you can connect multiple panels together and create a huge screen. It is recommended to use microcontrollers with large RAM memory capacity to operate the matrix. The module is powered with the voltage of 5 V. On the Wiki website, the manual and sample programs are available.

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
RGB LED matrix display with a resolution of 64 x 32 (2048 LED). DFRobot DFR0460
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. Color: GREEN. Adafruit 2972
No product available!
Flexible RGB 8x8 LED Matrix Module with Addressable WS2812B LEDs. modFlexMatrix8x8
No product available!
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM336
Module with 117x7 LED matrix display (77 LEDs). It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM442
Flexible 8x8 RGB LED matrix module. The set uses addressable SK6812/WS2812B diodes. DFRobot DFR0461
No product available!
This is the tiniest little LED grid, with 64 full RGB color pixels in a square. For use with Arduino and Raspberry Pi. Adafruit 3444
No product available!
Module of four integrated 8x8 LED (color red) matrixes based on the MAX7219 controller. Module controlled by the SPI interface.
No product available!
RGB LED matrix module with 64 APA102-2020 diodes in 8x8 arrangement. It is powered by 5V by the pads located on the bottom of the board and controlled by the SPI interface. SparkFun COM-15047
RGB LED WS2812B 8 x 4 matrix module for Raspberry Pi, one signal pin, additional power connector, direct RPI computer overlay. Waveshare RGB LED HAT
Matrix with 4 WS2812B RGB diodes controlled by a serial signal. The module can be powered with 5V, only one signal line is required for control
LED matrix display module (in red color) with an organization of 14 columns x 9 lines, compatible with Arduino.
9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. Color: COOL WHITE. Adafruit 2974
No product available!
RGB LED matrix display with a resolution of 64x64 (4096 LED). It has cutouts at an angle of 45° to build an LED cube. Adafruit 5407
8x16 LED matrix equipped with colored LEDs and a driver. It is powered by 5 V and communicates via the I2C interface (Gravity connector). DFRobot DFR0522
RGB LED matrix display with a resolution of 32 x 16 (512 LED). DFRobot DFR0471