zł67.07 tax excl.
The Led 16x16 WS2812 matrix is made of flexible material on which RGB LEDs are arranged in the form of 16 rows and 16 columns, one microcontroller pin is enough to operate them. Each pixel can emit color from a 24-bit palette.
The RGB LED color matrix module with individually addressed WS2812B diodes has a resolution of 16 x 16 and has the ability to add additional modules to expand the displayed area. The flexible material on which the LEDs are placed allows the modules to be mounted on a rounded surface, e.g. an arch or a pillar.
It is fully compatible with the NeoPixel library, it needs 5 V power supply and 3 A current for maximum consumption with all diodes lit white. Each LED draws a maximum of 60 mA.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
No product available!
LED display 13.2 mm 0.52 "single, red (635nm), 24 mcd / seg (10mA), common anode, RoHS. LED1-AS-05219BMR-B
RGB LED matrix display with a resolution of 64x32 (2048 LED) for Raspberry Pi Pico. Equipped with RTC clock, light sensor, buzzer and IR receiver. Waveshare Pico-RGB-Matrix-P3-64x32
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM491
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM335
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM336
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM334
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM333
Module with 5x5 RGB LED matrix display (25 LEDs). It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM435
Module with 117x7 LED matrix display (77 LEDs). It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM442
Matrix with 25 WS2812B RGB diodes controlled by a serial signal. The module can be powered by 5V, only one signal line is required for control
Module with 16x10 RGB LED matrix display (160 diodes) designed to work with the Raspberry Pi Pico. Communicates via a digital interface. Waveshare Pico-RGB-LED
RGB LED matrix display with a resolution of 64x64 (4096 LED). It has cutouts at an angle of 45° to build an LED cube. Adafruit 5407
No product available!
The module with an 8x8 LED matrix designed for Wemos D1 Mini
No product available!
Flexible RGB 8x8 LED Matrix Module with Addressable WS2812B LEDs. modFlexMatrix8x8
No product available!
This 40-pin GPIO module for the Raspberry Pi features 128 red LEDs arranged in a 16x8 grid. Using the IS31FL3731 driver communicating over the I2C bus, each LED can be independently controlled with 8-bit brightness control, enabling smooth animations and lighting effects. The module stores up to eight frames of animation in RAM and utilizes Charlieplexing technology, offering efficient control with a minimal number of pins. Adafruit 6115
This DIY kit allows you to create a compact and bright LED lamp using 9 diodes with a total intensity of approximately 16,000 mCd. Built-in resistors allow the system to be powered directly from a 5V power supply or from three AA batteries, ensuring flexibility and ease of use. Its simple design makes it ideal for soldering practice. Kitronik 2169
A circular board for the BBC micro:bit with 24 addressable ZIP LEDs, offering a full color spectrum and allowing for the creation of eye-catching lighting animations. Mounts directly to the micro:bit using screws, and additional pins allow for the connection of sensors or additional LEDs. Power is supplied via a JST socket or solder pads, and the built-in regulator also powers the micro:bit. The ZIP Halo is fully compatible with NeoPixel libraries and can be programmed in MakeCode or MicroPython. Kitronik 5625
An 8x8 panel with 64 addressable RGB LEDs, designed to work with the BBC micro:bit. It allows you to display text, animations, and lighting effects in full color, and thanks to the expansion connectors, multiple boards can be connected to create larger displays. The module is powered by a JST connector with a built-in regulator, and its design protects the micro:bit from overload. The ZIP Tile is easy to use thanks to MakeCode blocks and is ideal for educational projects, hobby projects, and interactive installations. Kitronik 5645
The Led 16x16 WS2812 matrix is made of flexible material on which RGB LEDs are arranged in the form of 16 rows and 16 columns, one microcontroller pin is enough to operate them. Each pixel can emit color from a 24-bit palette.