LuMini LED Matrix - 8x8 RGB LED matrix
ID: 574454
5906623420094
zł154.64
Tax included
zł125.72 tax excl.
RGB LED matrix module with 64 APA102-2020 diodes in 8x8 arrangement. It is powered by 5V by the pads located on the bottom of the board and controlled by the SPI interface. SparkFun COM-15047
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
RGB LED matrix module with 64 APA102-2020 diodes in 8x8 arrangement. It is powered by 5 V by the pads located on the bottom of the board and controlled by the SPI interface. The matrix functions like a string of LEDs and the numbering moves from left to right and from bottom to top. Four mounting holes facilitate mounting the module in the device, they can also be broken out if they are not needed in the project. The manufacturer has also provided space for an additional 4.7 µF capacitor. On the product page there is a guide with examples of use.
Features
- 8x8 RGB LED matrix
- 64 x APA102-2020 LED
- 4 x mounting holes
- Extra space for a capacitor
- Possibility of serial connection
- SPI interface
- 5V power supply
574454
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Regular pricezł209.00zł189.90
24h
Available quantity: 17
Available
Development board ESP8266 with WiFi module; WRL-13231
zł127.80
24h
Available quantity: 5
Available
This board combines the simplicity of the UNO’s Optiboot bootloader (which is used in the Pro series), the stability of the FTDI (which we all missed after the Duemilanove was discontinued) and the R3 shield compatibility of the latest Arduino UNO R3. SparkFun DEV-13975
zł95.23
24h
Available quantity: 1
Available
Other products in the same category (16)
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 300 mA, offering a wide beam angle of 120 °
zł6.84
24h
Available quantity: 12
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1000 mA, offering a wide beam angle of 120 °
zł27.55
24h
Available quantity: 2
Available
A module for building a rear bicycle light using 1000 mCd red LEDs. Power supplied by AA batteries, which are not included in the kit. Kitronik 2106
zł6.95
24h
Available quantity: 5
Available
LED diode 10LED two-colored - bargraph, ultra-10mcd (4mA) - max: 40mcd (20mA), ultragreen 10mcd 4mA) - max: 40mcd (20mA)
zł7.69
24h
Available quantity: 10
Available
Matrix with 16 WS2812B RGB diodes controlled by a serial signal. The module can be powered with 5V, only one signal line is required for control
zł5.60
24h
Available quantity: 8
Available
No product available!
Flexible 8x8 RGB LED matrix module. The set uses addressable SK6812/WS2812B diodes. DFRobot DFR0461
zł262.32
4 weeks
No product available!
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
zł27.80
24h
Available quantity: 3
Available
Ring light with 24 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-24
zł62.24
24h
Available quantity: 1
Available
8x16 LED matrix equipped with colored LEDs and a driver. It is powered by 5 V and communicates via the I2C interface (Gravity connector). DFRobot DFR0522
zł98.39
24h
Available quantity: 1
Available
Module with 42 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020173
zł120.42
24h
Available quantity: 2
Available
LED matrix display, consisting of 40 LEDs WS2812 type (5 lines, 8 kolumm), allows you to create interesting lighting effects using one control line
zł40.15
24h
Available quantity: 1
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 900 mA, offering a wide beam angle of 120 °
zł24.61
Delivery date unknown
No product available!
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM333
zł76.21
24h
Available quantity: 1
Available
Module with ATSAMD51J19 microcontroller and ESP32 WiFi system dedicated to matrix displays with HUB75 interface. Adafruit 4745
zł131.35
24h
Available quantity: 2
Available
The ring has eight RGB WS2812 diodes, controlled by means of serial signals. The module can be supplied with voltage from the 5V range, only one signal line is required to control it. NeoPixel Ring 8 x WS2812
zł4.85
24h
Available quantity: 30
Available
RGB LED matrix module with 64 APA102-2020 diodes in 8x8 arrangement. It is powered by 5V by the pads located on the bottom of the board and controlled by the SPI interface. SparkFun COM-15047