![WS2812-24 RGB LED Ring - RGB light ring with WS2812B diodes WS2812-24 RGB LED Ring - RGB light ring with WS2812B diodes](https://kamami.pl/48209-large_default/ws2812-24-rgb-led-ring-rgb-light-ring-with-ws2812b-diodes-dfr0888-24.jpg)
![WS2812-24 RGB LED Ring - RGB light ring with WS2812B diodes WS2812-24 RGB LED Ring - RGB light ring with WS2812B diodes](https://kamami.pl/48209-large_default/ws2812-24-rgb-led-ring-rgb-light-ring-with-ws2812b-diodes-dfr0888-24.jpg)
zł50.60 tax excl.
Ring light with 24 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-24
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The ring is based on RGB WS2812B diodes. They use a built-in driver that communicates via a special digital protocol, thanks to which only one pin of the microcontroller is enough to operate the module. The matrix has input and output connectors, they can be connected in series, as well as connected with a tape or other module with WS2812B diodes. The board is powered with the voltage from 3.3 V to 5 V and is equipped with a Gravity connector. Perfect as an electronic compass direction indicator.
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
No product available!
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
LED diode 10LED yellow - bargraph, replacement for: DC-10YWA
8x16 LED matrix equipped with colored LEDs and a driver. It is powered by 5 V and communicates via the I2C interface (Gravity connector). DFRobot DFR0522
Module with LED strip designed for the MyoWare 2.0 muscle tension sensor. Equipped with a LiPo battery, it allows you to build portable devices. SparkFun DEV-18387
Module with 10 addressable RGB LEDs APA102C. Each of the LEDs is independently controlled via the I2C interface, and the line address is modified, so that the modules can be connected with each other. SparkFun COM-18354
9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. Color: GREEN. Adafruit 2972
No product available!
RGB LED WS2812B 8 x 4 matrix module for Raspberry Pi, one signal pin, additional power connector, direct RPI computer overlay. Waveshare RGB LED HAT
Ring light with 16 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-16
Light ring with 24 single-color LEDs controlled by the I2C interface. The board can be powered with 5 V and consumes up to 5.5 mA per diode. Seeed Studio 104030013
Module with 5x5 RGB LED matrix display (25 LEDs). It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM435
A set of 10 mini modules with addressable RGBW Neopixel LEDs. The diodes are controlled using a popular single-wire interface, and their design allows the modules to be connected in series. Adafruit 4776
LED diode 10LED two-colored - bargraph, ultra-10mcd (4mA) - max: 40mcd (20mA), ultragreen 10mcd 4mA) - max: 40mcd (20mA)
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM491
Module of four integrated 8x8 LED (color red) matrixes based on the MAX7219 controller. Module controlled by the SPI interface.
Module with RGB LED, it is possible to control individual colors using digital signals as well as PWM signals. The module has a connector in accordance with the Grove standard. Seeed studio 101020472
9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. Color: BLUE. Adafruit 2973
No product available!
Adafruit 2226
Ring light with 24 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-24