![NeoPixel Ring 40 x WS2812 - RGB light ring with WS2812 diodes NeoPixel Ring 40 x WS2812 - RGB light ring with WS2812 diodes](https://kamami.pl/36008-large_default/neopixel-ring-40-x-ws2812-rgb-light-ring-with-ws2812-diodes.jpg)
![NeoPixel Ring 40 x WS2812 - RGB light ring with WS2812 diodes NeoPixel Ring 40 x WS2812 - RGB light ring with WS2812 diodes](https://kamami.pl/36008-large_default/neopixel-ring-40-x-ws2812-rgb-light-ring-with-ws2812-diodes.jpg)
zł43.16 tax excl.
Light ring with 40 RGB LEDs, type WS2812, controlled by a serial signal. The module can be powered by 5V, only one signal line is required to control it.
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The ring is constructed based on RGB diodes with a built-in driver (WS2812). The LEDs used are in the 5050 (PLLC-4) housing, thanks to which the width of the laminate does not exceed 6 mm. There are 40 LEDs on the circle. The module is ideally suited as an indicator of the direction to an electronic compass.
Flora NeoPixel 60 RGB LED Strip in Reel - White Backing. Adafruit 1138
No product available!
Adafruit 1463
No product available!
The ring has sixteen RGB WS2812 diodes, controlled by means of serial signals. The module can be supplied with voltage from 4-7V, only one signal line is required to control it. NeoPixel Ring 16 x WS2812B
The ring has eight RGB WS2812 diodes, controlled by means of serial signals. The module can be supplied with voltage from the 5V range, only one signal line is required to control it. NeoPixel Ring 8 x WS2812
Light ring with 60 RGB LEDs, type WS2812, controlled by a serial signal. The module can be powered by 5V, only one signal line is required to control it.
No product available!
Light ring with 32 RGB LEDs, type WS2812, controlled by a serial signal. The module can be powered by 5V, only one signal line is required to control it.
No product available!
IS31FL3731 LED Matrix Opto Feather Platform Evaluation Expansion Board. YELLOW matrix. Adafruit 3135
A set of 10 mini modules with addressable RGBW Neopixel LEDs. The diodes are controlled using a popular single-wire interface, and their design allows the modules to be connected in series. Adafruit 4776
24 individually addressable RGB LEDs arranged in a closely spaced circle, controlled with a single digital output of a microcontroller. Adafruit 1586
No product available!
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 600 mA, offering a wide beam angle of 120 °
Light ring with 24 single-color LEDs controlled by the I2C interface. The board can be powered with 5 V and consumes up to 5.5 mA per diode. Seeed Studio 104030013
LED diode 10LED yellow - bargraph, replacement for: DC-10YWA
This is the tiniest little LED grid, with 64 full RGB color pixels in a square. For use with Arduino and Raspberry Pi. Adafruit 3444
No product available!
Module with 15 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020172
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1000 mA, offering a wide beam angle of 120 °
Module of four integrated 8x8 LED (color red) matrixes based on the MAX7219 controller. Module controlled by the SPI interface.
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM527
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020170
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM491
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 350 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 1000 mA, offering a wide beam angle of 120 °
RTC DS1307 module with clock dedicated to matrix displays with HUB75 interface. Designed for minicomputers Raspberry Pi. Adafruit 2345
No product available!
Light ring with 40 RGB LEDs, type WS2812, controlled by a serial signal. The module can be powered by 5V, only one signal line is required to control it.