![Grove RGB LED Stick - strip with 15 RGB WS2813 Mini LEDs Grove RGB LED Stick - strip with 15 RGB WS2813 Mini LEDs](https://kamami.pl/40155-large_default/grove-rgb-led-stick-strip-with-15-rgb-ws2813-mini-leds-104020172.jpg)
![Grove RGB LED Stick - strip with 15 RGB WS2813 Mini LEDs Grove RGB LED Stick - strip with 15 RGB WS2813 Mini LEDs](https://kamami.pl/40155-large_default/grove-rgb-led-stick-strip-with-15-rgb-ws2813-mini-leds-104020172.jpg)
zł27.15 tax excl.
Module with 15 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020172
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Strip with 15 RGB LEDs WS2813 Mini. The board has DIN and DOUT pins, so that the user can connect modules in series and control them with one signal line. WS2813 supports the recovery system after a line break - in case of failure of one of the LEDs, the others will continue to glow. This system works until there are two faulty diodes next to each other. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via a digital interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation with examples of use is available on the product page.
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
Module with RGB LED WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020169
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020170
Module with 8x8 RGB LED matrix, MY9221 LED drivers and STM32F031 microcontroller. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 105020073
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
Module with vibration sensor LDT0-028. The board is equipped with a Grove connector and has a digital output. Seeed Studio 101020031
The module with the ADIS16470 chip, which combines a 3-axis accelerometer and a gyroscope. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020672
No product available!
Module with 4-digit 7-segment display with red digits. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044
Module with red LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030005
Module with PIR S16-L221D motion sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020353
Controller with 5 m RGB LED strip (10 LEDs per meter). The LEDs are mounted on a flexible white PCB. Communication is via the Grove interface. Seeed Studio 104020005
A small servo (23 x 11.5 x 24 mm) with a weight of 8.6 g, power supply 4.8-6V, maximum torque 1.8 kg / cm (at 6V). It has a connector compatible with the Grove standard. Seeed Studio 316010005
Module with a gesture sensor PAJ7620U2, which allows to recognize up to 13 gestures. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020083
Module with OLED 0.96" display with a resolution of 128x64 px. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 104030008
MIX8410 oxygen concentration sensor module. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101990680
A volume sensor designed to detect loud ambient sounds. The module uses a microphone and LM2904 amplifier. The output value (analog signal) depends on the volume of the detected sound. In order to eliminate interference, the microphone signal is subjected to double filtering. Seeed studio 101020063
MH-Z16 carbon dioxide sensor with Grove connector. It communicates via the UART interface. Seeed Studio 101020067
The module with the CY8C4014LQI touch sensor in the form of two buttons and a 5-segment slider. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020552
No product available!
ToF VL53L0X distance sensor module with a range of 3 to 200 cm. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020532
The module with the ACS70331 current sensor with a direct current measuring range up to 2,5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020652
Module with Grove connector equipped with AS5600 magnetic encoder with a resolution of 12-bit. It allows for non-contact measurement of the angle of rotation. The module has an analog/PWM output and an I2C interface. Seeed Studio 101020692
Module with 15 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020172