Grove RGB LED Ring - ring with 20 RGB WS2813 Mini LEDs
ID: 583138
5906623414680
zł52.25
Tax included
zł42.48 tax excl.
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020128
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Ring with 20 RGB LEDs WS2813 Mini. Chip supports the recovery system after a line break - in the event of one failure, the other LEDs will continue to glow. This system works until there are two faulty diodes next to each other. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via a digital interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation with examples of use is available on the product page.
Features
- WS2813 Mini diodes with a built-in controller
- Wake Up System
- Supply voltage: 3.3 V or 5 V
- Radius: 30 mm
583138
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł109.90
24h
Available quantity: 302
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Regular pricezł209.00zł189.90
24h
Available quantity: 24
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 12
Available
Module with RGB LED WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020169
zł24.54
24h
Available quantity: 4
Available
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
zł27.80
24h
Available quantity: 3
Available
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020170
zł43.95
24h
Available quantity: 2
Available
Module with 16 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020171
zł48.86
24h
Available quantity: 2
Available
Module with 8x8 RGB LED matrix, MY9221 LED drivers and STM32F031 microcontroller. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 105020073
zł79.65
24h
Available quantity: 3
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł29.54
24h
Available quantity: 2
Available
Other products in the same category (16)
Module with a microswitch (limit switch). The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044
zł16.61
24h
Available quantity: 2
Available
Set (5 pieces) of wires for attaching modeling servos with the Grove system. With one wire you can connect 2 servos to one Grove slot. Seeed studio 110990057
zł30.73
24h
Available quantity: 3
Available
Waterproof strip with RGB LED diodes, 1 m long (60 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020109
zł53.85
24h
Available quantity: 3
Available
Module with the SLA-05VDC-SL-C relay with a maximum load of 30 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020012
zł51.59
24h
Available quantity: 2
Available
Module with an EMG signal detector. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020058
zł159.99
24h
Available quantity: 2
Available
A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438
zł111.14
24h
Available quantity: 1
Available
Module with a magnetic sensor based on the CT10 reed switch. CT10 is a unipolar reed switch, normally open. The sensor reacts to the action of an electromagnet, permanent magnet or a combination thereof. The module has a connector in accordance with the Grove standard. Seeedstudio 101020038
zł19.83
24h
Available quantity: 2
Available
Module with green LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030007
zł13.06
24h
Available quantity: 2
Available
Green mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070023
zł11.54
24h
Available quantity: 3
Available
Module with a 3-axis BMA400 accelerometer with a measuring range up to ± 16g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020582
zł49.72
24h
Available quantity: 3
Available
The Hall sensor module allows magnetic field detection, can be used to measure angle of rotation, displacement, mechanical vibrations, etc. The module has a connector in accordance with the Grove standard. Seeed studio 101020046
zł37.11
24h
Available quantity: 2
Available
Module with a button and red LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044
zł13.68
24h
Available quantity: 2
Available
Module with GP2Y0D805Z0F proximity sensor, which can detect the presence of objects in the range from 0.5 to 5 cm. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020578
zł41.96
24h
Available quantity: 2
Available
Module with light sensor - LS06-S phototransistor. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020173
zł21.99
24h
Available quantity: 3
Available
Module with a 2-channel inductive sensor LDC1612. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020599
zł90.07
24h
Available quantity: 2
Available
Module with a gesture sensor PAJ7620U2, which allows to recognize up to 13 gestures. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020083
zł60.29
24h
Available quantity: 2
Available
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020128