![Grove RGB LED Ring - ring with 16 RGB WS2813 Mini LEDs Grove RGB LED Ring - ring with 16 RGB WS2813 Mini LEDs](https://kamami.pl/40203-large_default/grove-rgb-led-ring-ring-with-16-rgb-ws2813-mini-leds-104020171.jpg)
![Grove RGB LED Ring - ring with 16 RGB WS2813 Mini LEDs Grove RGB LED Ring - ring with 16 RGB WS2813 Mini LEDs](https://kamami.pl/40203-large_default/grove-rgb-led-ring-ring-with-16-rgb-ws2813-mini-leds-104020171.jpg)
zł39.72 tax excl.
Module with 16 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020171
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Ring with 16 RGB LEDs WS2813 Mini. The board has DIN and DOUT pins, so that the user can connect modules in series and control them with one signal line.
WS2813 supports the recovery system after a line break - in the event of one failure, the other LEDs will continue to glow. This system works until there are two faulty diodes next to each other. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via a digital interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation with examples of use is available on the product page.
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
Module with RGB LED WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020169
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020170
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
Module with vibration sensor SW-420. The board is equipped with a Grove connector and has a digital output. Seeed Studio 101020586
No product available!
intelligent gesture recognition module equipped with an IR camera module PAG7646J1, PAG7661QN (ISP) and a LED for backlighting. Recognizes and interprets hand gestures by recognizing the image recorded by an infrared camera. Seeed Studio 101991067
A small servo (23 x 11.5 x 24 mm) with a weight of 8.6 g, power supply 4.8-6V, maximum torque 1.8 kg / cm (at 6V). It has a connector compatible with the Grove standard. Seeed Studio 316010005
Module with LM386 audio amplifier and loudspeaker. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 107020001
Starter kit with 10 basic Grove modules and Base Shield V2 extension designed to work with Arduino boards. The user has at his disposal a number of lessons to get to know the possibilities of the set. Seeed Studio 103030375
Module with a 3-axis magnetometer BMM150. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020492
Grove module with FSR402 pressure sensor. The board is equipped with a Grove connector with an analog output. Seeed Studio 101020553
No product available!
Module with temperature sensor MCP9808. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020556
Module with LED driver. It can control LED strips with a length of 1 to 2 meters at a voltage of 9 V or from 1 to 5 meters at a voltage of 12 V. Seeed Studio 105020002
Module with RGB diode and P9813 controller. It is powered with the voltage of 5 V and controlled by the I2C interface (Grove). Seeed Studio 104030006
I2C 8-channel expander module. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 103020293
Module with GPS receiver (SIM28). The system allows you to track up to 22 satellites. The UART interface is used for communication with the system. The module has a connector in accordance with the Grove standard. Seeed Studio 113020003
No product available!
UART-RS232 converter module. The board was equipped with a Grove and DB9 connector. Seeed Studio 103020192
No product available!
Module with rotary potentiometer. The connector in this module has been moved to the other side of the PCB, which makes it easier to assemble and use this module. The module has a connector in accordance with the Grove standard. Seeed studio 101020048
Module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020452
Module with a gas concentration sensor MQ9, which enables the detection of carbon monoxide and combustible gases (methane, propane). The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020045
Module with 16 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020171