![BitMaker Lite - Grove expansion module for micro:bit BitMaker Lite - Grove expansion module for micro:bit](https://kamami.pl/40730-large_default/bitmaker-lite-grove-expansion-module-for-microbit-114991850.jpg)
![BitMaker Lite - Grove expansion module for micro:bit BitMaker Lite - Grove expansion module for micro:bit](https://kamami.pl/40730-large_default/bitmaker-lite-grove-expansion-module-for-microbit-114991850.jpg)
zł40.84 tax excl.
The expansion module with 3 Grove connectors for the micro:bit educational module. Seeed Studio 114991850
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The expansion module is designed for the micro:bit educational board. It is equipped with 3 Grove connectors that allow you to connect additional modules with sensors. There are 2 touch pads on the board, pads with all micro:bit pins, power switch and buzzer. The micro:bit module is plugged into the vertical connector located in the central part of the board, and the whole is powered by the microUSB connector. The module is a good solution for beginners who want to start learning with micro:bit.
BitMaker Lite is also available in a set with basic Grove sensors as the BitStarter Kit.
Starter kit for the micro:bit educational module. The kit includes an expansion module with Grove connectors, Grove modules and the necessary accessories. Seeed Studio 114991972
The expansion module with 6 Grove connectors for the micro:bit educational module. Seeed Studio 114991848
Starter kit with micro:bit v2. In addition to the micro:bit v2 board, the set includes a microUSB-USB cable, a battery basket and two AAA batteries. SparkFun DEV-17288
Starter kit for the micro:bit educational module. The kit includes an expansion module with Grove connectors, Grove modules and the necessary accessories. Seeed Studio 114991972
Data logger dedicated to micro:bit. It connects to the module via the UART interface and allows you to save data on a microSD card. SparkFun DEV-15270
SparkFun weather: bit module designed for micro: bit, with temperature, humidity and pressure sensor (BME280 system). In combination with the micro: bit module, it is possible to build a fully functional weather station. SparkFun DEV-15837
Multifunctional micro:bit expansion module with built-in Li-Ion battery. The board is equipped with a two-channel DC motor driver, 9 IO pins, I2C, UART interface, buzzer, 4 RGB LEDs and a charging circuit. DFRobot MBT0005
The module with the driver of 2 DC motors TB6612FNG and 3 servos, designed for the educational micro:bit module. Seeed Studio 105990091
No product available!
The module with a heart rate sensor and the SpO2 level dedicated to micro:bit. It is based on the MAX30102 chip and communicates via the I2C interface. SparkFun SEN-15271
Speaker for micro:bit is an expansion module with a loudspeaker designed for micro:bit with volume control and headphone output. Speaker for micro:bit
The pin expander is designed to work with the micro:bit educational board. Facilitates the construction of device prototypes. SB Components 20645
Starter kit for IoT projects with micro:bit modules. It contains a micro: bit plate and 7 modules with sensors, executive elements useful in projects related to the Internet of Things. DFRobot KIT0138
The expansion module is designed to work with the micro:bit educational board. It allows you to build an electronic piano
The IO expansion module is designed to work with the micro:bit educational board. There are 20 GPIO pins on the board, a buzzer and a voltage stabilization circuit
Micro:Mate is an expansion board for the micro: bit development module. It provides six 3-pin connectors with I/O outputs, a 3.5mm audio jack connector and is powered from a 5V microUSB connector. DFRobot DFR0518
No product available!
The expansion module is designed for micro:bit sets. Offers a simple, beginner-friendly robotics controller. SparkFun DEV-15713
Audio module with loudspeaker designed to work with micro:bit. There is an amplifier and an 8 Ω 2 W speaker on the board. Pimoroni PIM356
The expansion module with 3 Grove connectors for the micro:bit educational module. Seeed Studio 114991850