- Out-of-Stock
BitMaker Lite - Grove expansion module for micro:bit
ID: 583301
5906623416097
The expansion module with 3 Grove connectors for the micro:bit educational module. Seeed Studio 114991850
Description
The expansion module is designed for the micro:bit educational board. It is equipped with 3 Grove connectors that allow you to connect additional modules with sensors. There are 2 touch pads on the board, pads with all micro:bit pins, power switch and buzzer. The micro:bit module is plugged into the vertical connector located in the central part of the board, and the whole is powered by the microUSB connector. The module is a good solution for beginners who want to start learning with micro:bit.
BitMaker Lite is also available in a set with basic Grove sensors as the BitStarter Kit.
Features
- 3 Grove connectors (one with I2C)
- Buzzer
- 2 touch pads
- All pins micro:bit derived
- Power switch
- Power supply: 5 V microUSB
583301
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Educational micro:bit module with 32-bit ARM Cortex-M4 microcontroller. Manufactured to interest the youngest in computer engineering. SparkFun DEV-17287
zł72.90
24h
Available quantity: 13
Available
Starter kit with micro:bit v2. In addition to the micro:bit v2 board, the set includes a microUSB-USB cable, a battery basket and two AAA batteries. SparkFun DEV-17288
zł94.89
24h
Available quantity: 12
Available
Other products in the same category (16)
AVT kit for self-assembly of a universal 2-channel relay module. AVT1914 B
Retired
No product available!
Assembled universal 2-channel relay module. AVT1914 C
Retired
No product available!
Printed circuit board and programmed system for the electromagnetic transom control. AVT1919 A +
Retired
No product available!
AVT kit for self-assembly of the electromagnetic lock controller. AVT1919 B
Retired
No product available!
Assembled electromagnetic lock controller. AVT1919 C
Retired
No product available!
Printed circuit board and programmed system for the alarm control panel cooperating with the motion sensor. AVT1925 A +
Retired
No product available!
AVT kit for self-assembly of the alarm control panel cooperating with the motion sensor. AVT1925 B
Retired
No product available!
Assembled alarm control panel cooperating with the motion sensor. AVT1925 C
Retired
No product available!
AVT kit for self-assembly of the power distributor. AVT1930 B
Retired
No product available!
Assembled power divider, designed to supply several receivers from one voltage source with more power. AVT1930 C
Retired
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool. XF-ABS-175-GRAY
Retired
No product available!
Flexible PVC cover for 6M3 connector, for ØD = 3.5mm cable, length L = 24mm, width W = 6.5mm, black, RoHS
24h
Available quantity: 20
No product available!
The AM receiver of the DCF77 signal with the MAS6180 system, allows to receive the frames of the synchronization signal from the time standard, using the carrier frequency of 77.5kHz. Thanks to this module, it is possible to create a clock with automatic date and time synchronization. The module has a ferrite antenna. modDCF77
Retired
No product available!
Module with Tegra X1 SoC system containing four 64-bit ARM Cortex A57 cores and a Maxwell graphic layout consisting of 256 cores supporting CUDA technology. NVIDIA Jetson TX1
Retired
No product available!
Arducam-F Rev.C+ Camera module shield with OV2640 for Arduino UNO MEGA2560 DUE. ArduCam B0051+B0011
Retired
No product available!
The expansion module with 3 Grove connectors for the micro:bit educational module. Seeed Studio 114991850