![Main view Main view](https://kamami.pl/71766-large_default/neopixel-driver-bff-add-on-rgb-led-driver-for-qt-py-and-xiao.jpg)
![Main view Main view](https://kamami.pl/71766-large_default/neopixel-driver-bff-add-on-rgb-led-driver-for-qt-py-and-xiao.jpg)
zł18.94 tax excl.
RGB LED driver module designed for QT Py and Xiao boards. It uses a 3.3V/5V voltage level converter and allows to control 30 Neopixel LEDs. Adafruit 5645
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
RGB LED driver module designed for QT Py and Xiao boards. It is based on a 3.3V/5V 74AHCT125 voltage level converter and allows to control about 30 Neopixel LEDs (current up to 2 A total). By default it uses the A3 pin, but with jumpers you can configure the output on the SCL, TX, RX, SCK or MOSI pins. It is powered by 5 volts supplied through the USB connector to the QT Py and Xiao modules. Full documentation and sample programs are available on the product page.
A small development kit with a SAMD21 ARM Cortex M0 + microcontroller. There are 14 GPIO connectors on the board, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010328
Board with WiFi Espressif ESP32-S2 module and u.FL connector. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5348
Development kit with nRF52840 microcontroller with ARM Cortex M4F core and Bluetooth (BLE) 5.0 communication. Seeed Studio 102010448
Board with the WiFi Espressif ESP32-C3 module. It offers 4 MB of Flash memory and 400 KB of SRAM and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5405
No product available!
Board with the WiFi Espressif ESP32-C3 module. It offers 4 MB of Flash memory and 400 KB of SRAM and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5405
No product available!
Module with class D mono audio amplifier designed for QT Py and Xiao boards. It is based on the MAX98357 system and can work with a loudspeaker from 4 to 8 Ω with a power of up to 3 W. It communicates via the I2S interface. Adafruit 5770
No product available!
Evaluation board with ATSAMD21E18 microcontroller (Cortex M0 +, 48 MHz, 256 KB Flash and 32 KB RAM). Equipped with a STEMMA QT connector. Adafruit 4600
Adapter with 18-pin FPC connector with 0.5 mm pitch designed for QT Py and Xiao boards. It has pin-outs on the edge connectors. Dedicated to Adafruit\'s EYESPI series displays. Adafruit 5772
Extension module with Li-Ion and LiPo charger dedicated to QT Py boards. It allows you to charge the batteries with a current of up to 200 mA. Adafruit 5397
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700
Board with the WiFi Espressif ESP32-S2 module. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5325
Miniature module with button and RGB NeoPixel LED dedicated to QT Py and Xiao boards. Adafruit 5666
Board with WiFi Espressif ESP32-S2 module and u.FL connector. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5348
Miniature module with MicroSD card slot dedicated to QT Py and Xiao boards. Adafruit 5683
RGB 5x5 (25 LEDs) matrix LED display module designed for QT Py and Xiao boards. It uses SK6805 addressable LEDs and communicates via a single-wire interface. Adafruit 5646
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 4900
RGB LED driver module designed for QT Py and Xiao boards. It uses a 3.3V/5V voltage level converter and allows to control 30 Neopixel LEDs. Adafruit 5645