![QT Py S3 WiFi Dev Board - ESP32-C3 WiFi module board](https://kamami.pl/80987-large_default/qt-py-s3-wifi-dev-board-esp32-c3-wifi-module-board.jpg)
![QT Py S3 WiFi Dev Board - ESP32-C3 WiFi module board](https://kamami.pl/80987-large_default/qt-py-s3-wifi-dev-board-esp32-c3-wifi-module-board.jpg)
zł59.98 tax excl.
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Espressif ESP32-S3 WiFi module board. It has 4 MB Flash memory, 512 kB SRAM, 2 MB PSRAM and an integrated 2.4 GHz WiFi transceiver and BLE. A NeoPixel RGB diode and a 3.3 V stabiliser with up to 600 mA of current capability are included on the board. The 13 GPIO pins provide the user with analogue inputs, PWM, I2C, UART, SPI and I2S interfaces. The QT Py ESP32-S3 can be easily integrated with sensors due to the available STEMMA QT connector (compatible with Qwiic).
The module offers great potential for IoT systems and can be used both to control LEDs and to transfer data to a specific platform. It can also be programmed using the Arduino IDE, ESP-IDF or MicroPython.
Cable with USB type A and USB type C plugs, length 1m, white
No product available!
Cable with USB type A and USB type C plugs, length 2m, white
Miniature module with button and RGB NeoPixel LED dedicated to QT Py and Xiao boards. Adafruit 5666
RGB LED driver module designed for QT Py and Xiao boards. It uses a 3.3V/5V voltage level converter and allows to control 30 Neopixel LEDs. Adafruit 5645
Module with class D mono audio amplifier designed for QT Py and Xiao boards. It is based on the MAX98357 system and can work with a loudspeaker from 4 to 8 Ω with a power of up to 3 W. It communicates via the I2S interface. Adafruit 5770
No product available!
Board with the WiFi Espressif ESP32-C3 module. It offers 4 MB of Flash memory and 400 KB of SRAM and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5405
No product available!
Miniature module with MicroSD card slot dedicated to QT Py and Xiao boards. Adafruit 5683
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 4900
Extension module with Li-Ion and LiPo charger dedicated to QT Py boards. It allows you to charge the batteries with a current of up to 200 mA. Adafruit 5397
Board with the WiFi Espressif ESP32-S2 module. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5325
Adapter with 18-pin FPC connector with 0.5 mm pitch designed for QT Py and Xiao boards. It has pin-outs on the edge connectors. Dedicated to Adafruit\'s EYESPI series displays. Adafruit 5772
Evaluation board with ATSAMD21E18 microcontroller (Cortex M0 +, 48 MHz, 256 KB Flash and 32 KB RAM). Equipped with a STEMMA QT connector. Adafruit 4600
Board with WiFi Espressif ESP32-S2 module and u.FL connector. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5348
RGB 5x5 (25 LEDs) matrix LED display module designed for QT Py and Xiao boards. It uses SK6805 addressable LEDs and communicates via a single-wire interface. Adafruit 5646
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700