![Main view Main view](https://kamami.pl/83967-large_default/24ghz-mmwave-sensor-radar-human-presence-sensor-for-xiao.jpg)
![Main view Main view](https://kamami.pl/83967-large_default/24ghz-mmwave-sensor-radar-human-presence-sensor-for-xiao.jpg)
zł23.50 tax excl.
Module designed for the XIAO development platform. It acts as an advanced human presence sensor, using FMCW technology to detect human targets in a specific space. The module offers a maximum detection distance of up to 5 meters and a wide detection angle of ±60°. Seeed Studio 101010001
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
24GHz mmWave Sensor is a module designed for the XIAO development platform. It acts as an advanced human presence sensor, using FMCW (Frequency-Modulated Continuous Wave) technology to detect human targets in a specific space. It uses advanced radar signal processing and precise human body detection algorithms and achieves exceptional sensitivity in detecting human presence, accurately identifying both moving and stationary states. Intended mainly for indoor use. It uses modern technology of a 24 GHz millimeter wave radar sensor, which brings significant benefits in applications related to human body detection. It shows excellent sensitivity not only to moving human bodies, but also to static, micro-moving, sitting and lying bodies, exceeding the capabilities of traditional solutions.
The module offers a maximum detection distance of up to 5 meters and a wide detection angle of ±60 degrees, which guarantees accurate identification within the specified range. It supports the division of the detection range and effectively protects against external interference. Additionally, it supports Bluetooth, allowing you to directly adjust radar parameters using a dedicated application, eliminating the need to connect to a serial port. Moreover, the module demonstrates excellent environmental adaptability, maintaining uniform detection performance regardless of temperature, brightness, humidity or light changes. Its ability to penetrate the housing eliminates the need to drill holes in the surface, improving the overall aesthetics of the product. The module offers flexible configuration options for the furthest detection distance and sensitivity, enabling personalized and precise settings.
Doppler radar module with 24GHz transceiver. It allows for precise distance measurement and motion detection. The board communicates via the UART interface. Seeed Studio 101990883
A set with a Doppler radar module and an XIAO ESP32C3 board designed for precise detection of human presence. It allows you to connect additional Grove sensors (analog or with an I2C interface) and expand the functionality. Seeed Studio 110061541
Espressif ESP32-S3 WiFi and BLE module board. It offers 8 MB of flash memory and 8 MB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991114
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Seeed Studio 102010428
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991054
No product available!
An expansion board equipped with a 24-pin FPC connector, designed for the SeeedStudio XIAO series boards. Enables smooth control of the ePaper display. Seeed Studio 105990172
Acrylic housing designed for Seeeduino XIAO Expansion Board modules. Provides good protection against damage and has a dedicated space for the battery. Seeed Studio 110010024
Development kit with nRF52840 microcontroller with ARM Cortex M4F core and BLE communication. Equipped with motion sensors and a microphone. Seeed Studio 102010469
Board with WiFi and BLE Espressif ESP32-S3 module and OV2640 camera and digital microphone. It offers 8 MB Flash memory and 8 MB SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991115
Development kit with nRF52840 microcontroller with ARM Cortex M4F core and Bluetooth (BLE) 5.0 communication. Seeed Studio 102010448
Expansion module for Seeeduino XIAO. It is equipped with an OLED display, RTC, MiniSD slot, buzzer, buttons, servo connector and numerous interfaces. Seeed Studio 103030356
Development kit with ATSAMD21G18A microcontroller. It has 14 GPIO connectors, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010388
RGB LED matrix dedicated to XIAO boards, which offers a total of 60 WS2812B LEDs in a 6 x 10 diode system. Thanks to its compact size, it is ideal for projects with limited space, such as wearable devices. Seeed Studio 104030107
Expansion module for Seeeduino XIAO. It is equipped with Grove connectors and a lithium battery charging system. Seeed Studio 103020312
A set with a Doppler radar module and an XIAO ESP32C3 board designed for precise detection of human presence. It allows you to connect additional Grove sensors (analog or with an I2C interface) and expand the functionality. Seeed Studio 110061541
Module with a round, color LCD TFT display with a diagonal of 1.28" and a resolution of 240x240 pixels. Equipped with a touch panel. Communication is carried out via the SPI interface (display operation) and I2C (touch panel). Seeed Studio 104030087
A small development kit with a SAMD21 ARM Cortex M0 + microcontroller. There are 14 GPIO connectors on the board, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010328
Module designed for the XIAO development platform. It acts as an advanced human presence sensor, using FMCW technology to detect human targets in a specific space. The module offers a maximum detection distance of up to 5 meters and a wide detection angle of ±60°. Seeed Studio 101010001