24GHz mmWave Sensor - radar human presence sensor

Module with an optical flow sensor PMW3901. It uses a low resolution camera to detect surface movement. It communicates via the SPI interface. Pimoroni PIM453

The MR60FDA2 sensor kit uses 60GHz mmWave technology to reliably detect falls and people. It offers Home Assistant integration thanks to the XIAO ESP32C6 module and pre-installed ESPHome firmware. Equipped with a BH1750 light intensity sensor, RGB LED indicator and the possibility of expanding with Grove sensors, it is ideal for monitoring health, safety and home automation. Seeed Studio 114993388

The module is based on the Acconeer XM125 radar, which uses 60 GHz radar technology, offering distance measurement up to 20 meters and recognition of objects and their movement speed. The sensor is characterized by low power consumption, making it ideal for battery-powered devices, and also allows for various detection modes, such as level measurement or human presence. Supported by the Arduino library and the Acconeer Exploration Tool, the module provides support for monitoring, debugging and configuration, offering a wide range of applications from smart homes to advanced robotics and security systems. SParkFun SEN-24540

Universal weather station for measuring wind speed and direction, temperature, humidity and atmospheric pressure, compatible with micro:bit, Raspberry Pi, ESP32 and Unihiker controllers. It has 16 MB of internal memory, which allows for 160 days of data storage at a minute sampling rate, and data can be exported via USB Type-C port. The sturdy metal casing with a waterproof protective coating and compatibility with tripods make the station ideal for field atmospheric research and educational projects. DFRobot EDU0157-EN

A 24 GHz FMCW radar with Wi-Fi 802.11b/g/n and Bluetooth 5.0 BLE support, enabling precise detection of motion and human presence. Equipped with an integrated detection algorithm and a RISC processor with SPI, UART, I²C, PWM, and GPIO interfaces, it provides flexible configuration and reliable communication in IoT systems. With a wide operating temperature range (-40°C to +85°C), a built-in radar antenna, and WPA3 support, the module is ideal for smart homes, building automation, and security systems.

The GR10-30 sensor module, which can recognise up to 12 user gestures from a distance of up to 30 cm. It supports communication via both UART and I2C interfaces. DFRobot SEN0561

Module with a gesture and touch sensor. It recognizes 7 types of gestures and has 5 touch buttons. It is supplied with a voltage ranging from 3.3 V to 5 V and communicates via UART. DFRobot SEN0285

Air speed sensor module based on the FS3000-1005 chip. The board is equipped with Qwiic connectors. SparkFun SEN-18377

Module designed for the XIAO development platform. It acts as an advanced human presence sensor, using FMCW technology to detect human targets in a specific space. The module offers a maximum detection distance of up to 5 meters and a wide detection angle of ±60°. Seeed Studio 101010001

IR optical sensor module based on a slotted optocoupler. It enables the construction of an incremental encoder

Waveshare Photo Interrupter Sensor is an IR optical sensor module with Schmitt trigger and a signaling diode allowing the construction of an incremental encoder. Waveshare Photo Interrupter Sensor

A small module with a PIR motion sensor. It allows detecting movement within a maximum range of 6 meters (default up to 3 meters). The measuring angle is 120 degrees. The module has a connector in accordance with the Grove standard. Seeed Studio 101020020

A sensor for measuring the wind speed. It has a built-in Hall sensor and enables measurements in the range from 0 to 32.4 m/s. DFRobot SEN0483

Motion detection module featuring Panasonic\'s EKM series PIR sensor. The EKM series is optimised for detecting small movements and is ideal for detecting movement in a small area around the sensor. It offers digital output in 32 zones with a detection distance of 5 m and a detection area of 90° x 90°. SparkFun SEN-22000

Module with trackball and RGB backlight. It has a built-in button and is perfect for building your own mouse, for example. Pimoroni PIM447

Advanced 60 GHz radar, capable of detecting human presence, falls, posture and vital signs such as heart rate and breathing – even when motionless. Ceiling-mounted and compatible with platforms such as Arduino or ESP32, it is ideal for healthcare systems, especially for monitoring sleep and the safety of the elderly. DFRobot SEN0623