Digital Flex Sensor - flexible motion sensor

Module with a PIR motion sensor. It can detect movement up to 5 meters with a detection angle of 120 degrees

The module with a gesture detection sensor PAJ7620U2 designed for M5Stack sets. He can recognize 9 gestures and communicates via the I2C interface. M5Stack U127

A sensor for measuring the wind speed. It has a built-in Hall sensor and enables measurements in the range from 0 to 32.4 m/s. DFRobot SEN0483

Module with a motion sensor that uses the Doppler effect to detect moving objects using microwaves. It is powered with the voltage of 5 V and has a digital output (Gravity connector). DFRobot SEN0192

Crowtail-Mini PIR Motion Sensor 2.0 is a miniature digital PIR sensor with a built-in DSP and RFI filter, intended for motion detection in compact systems. It is used in alarms, lighting control and robotics.

Wind direction sensor with a measuring range up to 60 m/s and 360° ensures high accuracy and fast response time, thanks to the use of low-resistance bearings and precision components. It supports various output signal types, including analog (0–5 V, 4–20 mA) and digital (RS485, LoRa, GPRS, 4G), enabling broad integration in meteorological, agricultural, and industrial systems. The durable polycarbonate construction and IP65 protection rating ensure reliable operation even in harsh environmental conditions.

This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. This unit works great from 5 to 12V (datasheet shows 12V). You can also install a jumper wire past the 5V regulator on board to make this unit work at 3.3V. Sensor uses 1.6mA@3.3V. SEN-13285

Finder 18.31.8.230.0031 is a PIR sensor for flush mounting, controlling a single NO contact rated at 10 A at 230 V AC. Ideal for automatic indoor lighting control, it is mounted in suspended ceilings and ensures reliable and safe operation.

Module with a PIR motion sensor. It can detect movement up to 7 meters with a detection angle of 100 degrees. DFRobot SEN0171

Module with a gesture sensor PAJ7620U2, which allows to recognize up to 13 gestures. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020083

Module with trackball and RGB backlight. It has a built-in button and is perfect for building your own mouse, for example. Pimoroni PIM447

Module with PIR EKMC4607112K motion sensor, power consumption in standby mode up to 170 uA. SparkFun SEN-17372

Module with a PIR motion sensor designed for M5Stack modules. It can detect movement up to 5 meters with a detection angle of 100 degrees. M5Stack U004

Doppler radar module with 24GHz BGT24LTR11 transceiver. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020021

Module with vibration sensor LDT0-028. The board is equipped with a Grove connector and has a digital output. Seeed Studio 101020031

A 24 GHz FMCW radar with Wi-Fi 802.11b/g/n and Bluetooth 5.0 BLE support, enabling precise detection of motion and human presence. Equipped with an integrated detection algorithm and a RISC processor with SPI, UART, I²C, PWM, and GPIO interfaces, it provides flexible configuration and reliable communication in IoT systems. With a wide operating temperature range (-40°C to +85°C), a built-in radar antenna, and WPA3 support, the module is ideal for smart homes, building automation, and security systems.